I have a 2008 23FBSE and the pigtail 7 way connector was getting worn. I asked my dealer to order a new one from AS and replace it.
Lo and behold the new pigtail is not the same as the old one and is not snugging up into my pin receptacle like the old one did. The original pigtail that came on my 2008 23FB had a plastic notch on the top of it that when plugged in would stick up and I could then press down the receptacle cover over it and it would sit snug against the plastic notch thus holding the pigtail in the receptacle.
The replacement pigtail's notch is a good 1.5 inches away from where the old one was and therefore I can't push the receptacle cover down over it to hold it in the receptacle.
I called Airstream and the parts group told me all of the pigtails they use are the same.
Has someone else run into this problem and is there some old part number that I need to be referring to in order to get a replacement pigtail that is the same as my old one?
Of course, the dealer threw out my old one when they did the replacement.
Will try to snap a few photos later today so you can visualize what I am describing.