when I put in an 1156 LED replacement bulb in my interior wall lite of my 65 caravel , it didn't work. the old auto-type bulb worked in there,so.... how do you find out if it's a grounding issue if both wires disappear into the wall? and how would you fix it?? joe in MN
The polarity in the fitting could be reversed. Use a multimeter to test if the center pin in the socket is +12V relative to the outer shield. If it's -12V, reverse the wires to the fixture. LED bulbs generally require correct polarity in the socket although some have a rectifier built in so they can also be used on negative-ground circuits.
Without the multimeter you can just switch the wires to the fixture and see if it works.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.