Dometic Fridge

[Kalidas]

Hello Everyone,
Some back story. Plugged the trailer into 240V by accident last month.
I replaced the converter with a Parallax RU55. Had quite a time getting the old one out. The little hex screws must have been torqued in by a gorilla. Striped one so bad I needed vice grips to get it out.
Seems to be working perfectly. Though the front plate doesn't line up quite perfectly. Will be getting back in touch with Parallax.
Anyway, the new issue is that I am pretty sure that I blew out the refrigerator control board. Luckily, that is the only thing that seems to not be working.
I am trying to find a replacement, but am unable to find the anyone offering the actual control board with the same number. Does it have to be the exact match?
Anyone have the same problem?
Thanks

[DaveP]

I replaced the control board for my Dometic A/C unit this summer. The PN was not the same, but I could see that all of the components and shape of the board were the same. I got it and it worked. Ask the supplier to send you a high resolution electronic photo so that you can compare the board he has to your board. Good luck.

[vintagemotor]

Dometic changes their part numbers constantly, so don't worry about that, just get the board that matches your connector setup, thats all.