Dometic Comfort Control Center 2 issue

[Ted S.]

Curious if anyone has had an idea issue with no furnace power? Everything works but the thermostat won't sent power to the furnace. I've tried everything, reset, fuses, etc. no power is sent to the furnace.

[wave man]

Newb here with a FC25FB2018...Well, keep an open mind for the simple things I’d urge. Then resort to the experts

-Got propane?
-Propane flowing?
-Using the right control?....if I’m not using the correct controller ie unit one not unit 2 or whatever I won’t get it going..
-I understand the furnace fan is a real juice hog make sure it’s on shore power.
-Make sure you manually flip the fuses to the trip position then back in case you get a sneaky trip where visually it isn’t obvious
-look into the furnace compartment outside... see a flame? See anything obviously amiss etc
-open up access to see the furnace inside if ya can, just some screws usually, visually check wires never know what might’ve been left unfinished in the build refurb etc

Good luck!