|
Cabinet Wiring - 2015 27FB EB
Over the weekend, I removed the blue-ray player and the enclosure from the rear overhead storage of my 2015 27FB EB. Its going to be replaced with a PS4 and Apple TV. I've got a handle on the electronics, 3x1 HDMI switcher, etc.
My plan was to cut a hole in the middle bottom of the storage area and install a 110V / HDMI pass through adapter wall plate. This would allow me to sit at the dinette table, plug in laptop power overhead and connect the laptop via HDMI to the 4K TV I installed (in the Eddie Bauer, the nearest outlet is above the side seating, so not the nicest place to run a power cord). I figured a wall plate below the storage would be cleaner than running wires up, around, and through the sliding doors.
I have (3) lights underneath the storage unit. To look into the storage unit from above, there is a smooth floor (no wires or mounting for the lights below).
Does anyone know the method / routing of the wires to power the (3) lights under the storage unit? I want to make sure when I make the cut, that I don't go through any wires.
For reference, I attached photos of the HDMI wall plate I intend to use.
|
Linear Mode
