Quote:
Originally Posted by GMFL
No,
Each panel will produce 22 volt roughly. So 5 in series would be 110volts so Victron could cover it. I just don’t want that many panels in series. I prefer 2 in series for 44 volts. ( which is safe at around 48 volts). Anything higher than that starts to get scary with shorts and fire risk. Heck 44 is plenty.....
|
Ok I understand. I am more concerned with high currents than high voltages but the currents are pretty low in either case.
Could you parallel the 5 on each side then, use two 100/30's to keep voltage low and amps still in the normal range, or step up to 100/50's for the overhead.
__________________
2014 Torque TQ290, Hensley Arrow w/adjustable stinger
2018 F-350 Lariat Ultimate DRW, 4x4, 6.7, 4.10
2008 KTM 300 XC-W
2005 Kawasaki KX 85
2018 Can-Am Maverick Trail 800 DPS
|
Linear Mode
