We pulled our AS from Fl. to TX last weekend and had a great trip with no problems. I have started working on the rear of the unit where the biggest problem area is. The trailer was parked under a carport with the rear end sticking out a few feet. The rear frame from about 12" under the back edge is gone. I have the rear bumper, but is had been stored inside for the last year or so, since is rusted off. After droping the rear panels, the rust damage is less than I expected. The last three outrigers on both sides need to be replaced and the missing frame sections repaired. My questions so far are, 1. how far out from the lower rear edge of the shell do the bumper supports need to be, and 2. what is the recomended material for the replacement of these supports.
I have a lot more questions, but I'm taking this one step at a time. Thanks