I see from you address you may have a little trouble getting it. It is sold at most well stocked marine stores. I buy it at Boaters World or West Marine (no relation to West Systems Epoxy). Boaters World is usually lower priced and I saw it on Boaters World's website. Measuring accurately is important so be sure to get the pumps for precise measuring. In warm weather the standard hardner may be too fast, so use the slow hardner. And for spreading the epoxy, use the yellow West System foam rollers. Cleanup is much easier using the West System cleaner. http://www.boatersworld.com/webapp/w...atalogId=10051
After researching several epoxies that I use in building canoes and boats I have found that WEST is somewhat over priced. I have had great results using epoxy from FGCI. http://www.fgci.com/ I have no ties to this company and receive no kickbacks. I just like to see folks get thier money's worth.
WestSystem.com has a dealer locater icon. I plan to fill-in a small 1" sq. water damage area adjacent to the entry door hindge side. I've also thought about using epoxy over the entire floor to water seal it before installing my tile, cork, carpet, bamboo floor.
Any comments on what the epoxy seal would do to depreciate the adhesive surface qualities of plywood?
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.