1997 Safari - replacing subfloor

[mark arizona]

Howdt from southeast Texas

I am replacing a section of plywood subfloor in the rear storage area compartment, under the twin beds and in front of the finished bulkhead panel that comprises the rear storage

The cause being a leaking pressure reducing valve just inside the storage compartment right behind the hose connect

It would be real helpful to be able to view some shop drawings, i. e. a cut way view of the r.v. wall and subfloor channel

I’m sorry for the clumsy wording, I’m not sure if the proper nomenclature !

Are there blueprints/shop drawings available somewhere ?
Does AIRSTREAM make them available ?

Thanksinadvance,

mark arizona

[Bob Blarney]

This cutaway illustration is one that I found on a thread here. Others are available on the internet- try googling "Airstream Tandem Chassis".

There is a lot of info about what will be necessary to repair your AS on this forum. Try the search box above.

[mark arizona]

Originally Posted by Bob Blarney

This cutaway illustration is one that I found on a thread here. Others are available on the internet- try googling "Airstream Tandem Chassis".



There is a lot of info about what will be necessary to repair your AS on this forum. Try the search box above.

Thanks Bob

I’ll definitely try the AS tandem chassis angle
The visuals are helpful
I really appreciate the feedback

mark arizona