Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-23-2013, 06:42 PM   #521
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Quote:
Originally Posted by 62overlander View Post
really trying to help...
when you put fuses in the bottom half of the 110 side you will have no power. You have to jump from the one black terminal on the main fuse to the other. I found this out in a very hard lesson.
And while I am laying all this (hopefully positive) criticism on you... Only strip off the insulation that goes into the terminals. It is not a good idea to have a lot of bare copper showing in a distribution box. Once again, I found this out in a very hard lesson.
Frank I am not delicate so please criticize me. Posting as a novice you should expect it. I was told to set the switch up like this( minus the other grounds) from the place i purchased the switch. The fans on the dc side work so does the jack. When i cut off the batts the jack doesn't work. I am going to see if all is working when i get home.
marzboy is offline   Reply With Quote
Old 01-23-2013, 06:49 PM   #522
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Quote:
Originally Posted by M2HB View Post
I have one of those battery switches on my Avion C-11/trailer. It has 3 connections. Battery 1, Battery 2 and Common. The positive of battery 1 goes to terminal 1, the positive of battery 2 goes to terminal 2 and the output (positive output from the switch) to wherever it goes ties to the common port. I don't know if your switch is the same as mine (mine is NOS and 40 years old) but it is used for switching between battery 1, battery 2, both batteries, or OFF.

It shouldn't have any ground (common) going to the "common" terminal. If that is what is going on, you may have a problem. I don't know if yours is the same as mine, but it may be.
My switch is just to turn the batteries on and off it is made by perko
marzboy is offline   Reply With Quote
Old 01-23-2013, 08:07 PM   #523
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Ok here is the basic set up. Pos to cut off switch 60amp inline fuse neg to converter battery grounded to frame green cable
marzboy is offline   Reply With Quote
Old 01-23-2013, 08:09 PM   #524
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Click image for larger version

Name:	ForumRunner_20130123_190904.png
Views:	110
Size:	408.0 KB
ID:	177315



Click image for larger version

Name:	ForumRunner_20130123_190851.png
Views:	111
Size:	350.4 KB
ID:	177314



Click image for larger version

Name:	ForumRunner_20130123_190830.png
Views:	127
Size:	384.1 KB
ID:	177313
marzboy is offline   Reply With Quote
Old 01-23-2013, 09:15 PM   #525
4 Rivet Member
 
Vintage Kin Owner
Phoenix , Arizona
Join Date: May 2012
Posts: 482
Just curious about going from red to a white wire on the positive side of the battery to the switch.
M2HB is offline   Reply With Quote
Old 01-23-2013, 09:21 PM   #526
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Quote:
Originally Posted by M2HB View Post
Just curious about going from red to a white wire on the positive side of the battery to the switch.
Oh that. Since I was switching stuff around I didnt have time to make a new black power cord. Dont worry its legit I will make the proper colored cable this weekend. For now its just the wrong color but its not set up wrong.
marzboy is offline   Reply With Quote
Old 02-18-2013, 11:29 AM   #527
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Here is the updated proposed layout of my interior
Attached Thumbnails
Click image for larger version

Name:	65 AIRSTREAM ROUGH SCHEMATIC.jpg
Views:	196
Size:	125.5 KB
ID:	179271  
marzboy is offline   Reply With Quote
Old 03-11-2013, 07:24 PM   #528
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Got a bit more of the electrical done. Also finished the front lower interior walls

Click image for larger version

Name:	ForumRunner_20130311_182130.png
Views:	157
Size:	385.0 KB
ID:	180846



Click image for larger version

Name:	ForumRunner_20130311_182149.png
Views:	147
Size:	419.2 KB
ID:	180847



Click image for larger version

Name:	ForumRunner_20130311_182218.png
Views:	150
Size:	368.8 KB
ID:	180848



Click image for larger version

Name:	ForumRunner_20130311_182235.png
Views:	147
Size:	311.1 KB
ID:	180849



Click image for larger version

Name:	ForumRunner_20130311_182248.png
Views:	146
Size:	395.9 KB
ID:	180850



Click image for larger version

Name:	ForumRunner_20130311_182312.png
Views:	145
Size:	371.4 KB
ID:	180851



Click image for larger version

Name:	ForumRunner_20130311_182300.png
Views:	157
Size:	395.3 KB
ID:	180852
marzboy is offline   Reply With Quote
Old 03-12-2013, 04:59 AM   #529
Restorations done right
Commercial Member
 
Frank's Trailer Works's Avatar
 
1962 26' Overlander
1961 26' Overlander
Vintage Kin Owner
Currently Looking...
Baltimore , Maryland
Join Date: Aug 2007
Posts: 5,545
Images: 2
Javier, That first picture of the switch... those require the 90* female crimp plugs... make sure you crimp XTRA hard. They seem to come off the wire a lot on me.
Frank's Trailer Works is offline   Reply With Quote
Old 03-12-2013, 10:03 AM   #530
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Quote:
Originally Posted by 62overlander View Post
Javier, That first picture of the switch... those require the 90* female crimp plugs... make sure you crimp XTRA hard. They seem to come off the wire a lot on me.
Thank you Frank where do u get your crimp plugs from? Do you use a special tool or just pliers?
marzboy is offline   Reply With Quote
Old 03-12-2013, 02:22 PM   #531
Restorations done right
Commercial Member
 
Frank's Trailer Works's Avatar
 
1962 26' Overlander
1961 26' Overlander
Vintage Kin Owner
Currently Looking...
Baltimore , Maryland
Join Date: Aug 2007
Posts: 5,545
Images: 2
They are called flag quick connect terminals. You use a standard electrical crimp tool.
Frank's Trailer Works is offline   Reply With Quote
Old 03-12-2013, 05:13 PM   #532
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Quote:
Originally Posted by 62overlander View Post
I will pick some up! If you ever get out this way I owe you a beer!
marzboy is offline   Reply With Quote
Old 03-12-2013, 06:19 PM   #533
Restorations done right
Commercial Member
 
Frank's Trailer Works's Avatar
 
1962 26' Overlander
1961 26' Overlander
Vintage Kin Owner
Currently Looking...
Baltimore , Maryland
Join Date: Aug 2007
Posts: 5,545
Images: 2
anything for you my MexiCan buddy!!!!
Frank's Trailer Works is offline   Reply With Quote
Old 03-17-2013, 08:20 PM   #534
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
We when I get a bug up my butt to do something it can get me into a bit of trouble. I was going to finish my lower inner walls but the panel just out side the front door was really buggin so.....
marzboy is offline   Reply With Quote
Old 03-17-2013, 08:29 PM   #535
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Click image for larger version

Name:	ForumRunner_20130317_192906.png
Views:	296
Size:	397.5 KB
ID:	181291



Click image for larger version

Name:	ForumRunner_20130317_192915.png
Views:	244
Size:	415.3 KB
ID:	181292



Click image for larger version

Name:	ForumRunner_20130317_192923.png
Views:	267
Size:	345.1 KB
ID:	181293
marzboy is offline   Reply With Quote
Old 03-17-2013, 09:46 PM   #536
Rivet Master
 
desertair27's Avatar
 
1957 22' Caravanner
1960 26' Overlander
1963 24' Tradewind
El Paso , Texas
Join Date: Feb 2011
Posts: 945
Images: 32
Good job Javier,

I'm getting ready to do my first panel replacement! Your work looks Pro!
Mike
desertair27 is offline   Reply With Quote
Old 03-18-2013, 12:00 AM   #537
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Quote:
Originally Posted by desertair27 View Post
Good job Javier,

I'm getting ready to do my first panel replacement! Your work looks Pro!
Mike
Thanks Mike the pannels are pretty time consuming but worth it in the end. Good luck with your pannels!
marzboy is offline   Reply With Quote
Old 03-18-2013, 05:42 AM   #538
Restorations done right
Commercial Member
 
Frank's Trailer Works's Avatar
 
1962 26' Overlander
1961 26' Overlander
Vintage Kin Owner
Currently Looking...
Baltimore , Maryland
Join Date: Aug 2007
Posts: 5,545
Images: 2
Sometimes I wish there was a "like" button....
Frank's Trailer Works is offline   Reply With Quote
Old 03-18-2013, 05:54 AM   #539
Always learning
 
Lance M's Avatar
 
1972 29' Ambassador
1962 19' Globetrotter
1951 21' Flying Cloud
Central , Texas
Join Date: Oct 2010
Posts: 2,861
Images: 24
Blog Entries: 2
Send a message via Yahoo to Lance M
Nice. Like
__________________
Lance

Work is never done, so take time to play!
Lance M is offline   Reply With Quote
Old 03-18-2013, 06:57 AM   #540
Rivet Master
 
utee94's Avatar
 
1963 26' Overlander
Austin , Texas
Join Date: Feb 2008
Posts: 2,640
Yup, Like.
utee94 is offline   Reply With Quote
Reply

Tags
1965, 1965 sovereign, buck rivet, frame repair, olympic rivet, shell off


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
'63 Overlander Rehab.... tgregory13 1960 - 1964 Overlander 43 12-09-2010 09:40 AM
Need Rehab Buddy for Hubby/Anywhere in US! goobygirl General Repair Forum 6 09-17-2009 12:47 AM
Getting Assistance in Rehab? goobygirl General Interior Topics 9 09-15-2009 11:22 PM
First Use Rehab Merry Stahel General Interior Topics 16 11-18-2006 07:41 PM
6 metre interior rehab? Janet H All Argosy Trailers 2 09-24-2003 04:17 PM


Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.



All times are GMT -6. The time now is 06:51 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.