|
|
03-18-2014, 08:04 PM
|
#921
|
Rivet Master
1973 25' Tradewind
Bloomsbury
, New Jersey
Join Date: Jul 2010
Posts: 696
|
OK, long shot, how about a lesson on fixing a sprung door? My 73 Tradewind is not tight where the door meets the sides top or bottom. John
|
|
|
03-18-2014, 08:07 PM
|
#922
|
Retired.
Currently Looking...
.
, At Large
Join Date: Jun 2003
Posts: 21,276
|
Quote:
Originally Posted by moparjohn
OK, long shot, how about a lesson on fixing a sprung door? My 73 Tradewind is not tight where the door meets the sides top or bottom. John
|
Most '73's have a cast aluminum door. Chances are, if it's sprung, it's broken.
I can still show people with a '74 and newer trailer how to bend their doors back into submission. All it takes is two people and a 2x4.
__________________
Meddle not in the affairs of dragons, for you are crunchy, and taste good with ketchup.
Terry
|
|
|
03-18-2014, 08:15 PM
|
#923
|
Rivet Master
2007 25' Safari FB SE
2000 30' Excella
1999 30' Excella 1000
Low Country
, South Carolina
Join Date: Feb 2004
Posts: 820
|
Speaking of bending, Terry, the latch on the screen door is very tight and you have to push on the door to get it to latch. It has been adjusted as far as possible. Is there a good solution.
__________________
StreamNTyme
|
|
|
03-18-2014, 09:05 PM
|
#924
|
Retired.
Currently Looking...
.
, At Large
Join Date: Jun 2003
Posts: 21,276
|
Quote:
Originally Posted by StreamNTyme
Speaking of bending, Terry, the latch on the screen door is very tight and you have to push on the door to get it to latch. It has been adjusted as far as possible. Is there a good solution.
|
I'll see what I can do with it.
__________________
Meddle not in the affairs of dragons, for you are crunchy, and taste good with ketchup.
Terry
|
|
|
03-18-2014, 09:34 PM
|
#925
|
3 Rivet Member
2015 28' Flying Cloud
Ladson
, South Carolina
Join Date: Feb 2004
Posts: 231
|
Looking forward to jewelry making! While guys are listening to tech stuff us gals can be having fun. I'm sure Rita will help!
__________________
Kathy Narowski
#2555
SC Coastal Unit
TAC-SC5
|
|
|
03-19-2014, 04:52 AM
|
#926
|
Rivet Master
Commercial Member
1993 34' Excella
York
, South Carolina
Join Date: Jan 2010
Posts: 3,417
|
Thanks Jon, your gas sniffer would be a wonderful asset to the rally. I have been to WBCCI rallys where the safety chairman went trailer to trailer with one, checking the tanks. Some pass, some fail.
And thank you Terry for leading the way with the "5 minute tech tips". For those than don't already know, Terry works in parts and service at Out of Doors Mart. Unfortunately, due to prior commitments, he and Marie must leave early afternoon on Saturday, so catch him early.
Thanks ,too, Cynthia for the jewelry making offer. We have at least one other jewelry maker coming, perhaps it could be a joint affair. A good thing for the ladies while the men folk talk shop. And yep, Rita LOVES making jewelry, all ya need to do is invite her.
Thanks also for all the tents, tables, and equipment. Hopefully the weather will cooperate, but regardless, it will be good to have them set up in the group area. A rough guess puts the crowd at as many as 150 people.
A quick recap:
Thursday nite hot dog feast for anyone there. We have the dogs, buns, chili, slaw, chips, and condiments covered, thanks to various folks coming. Anything else is welcome.
No plans for Fri am/ lunch.
Fri nite is possum bog. Anything goes with it.
Sat am --potluck breakfast, anything to share. We have coffee.
Sat lunch---own your own. Catch a nap, get ready for a great afternoon.
Sat nite .....the fish fry. We have the fish(fillets), shrimp,devil crab, FF, HP. deserts would be nice.
Sun am.....left overs, anything easy. We have the coffee.
Thanks in advance to everyone for chipping in to make this a great event.
John
__________________
John
WBCCI #268 Palmetto State Airstream Club 22
Region 3 Past President....come with us, you will like it.
Go often to the house of a friend, for weeds choke the unused path........Emerson
Are you kind?..... Uncle John's Band
|
|
|
03-19-2014, 01:39 PM
|
#927
|
1 Rivet Member
2005 31' Classic
Castalian Springs
, Tennessee
Join Date: Mar 2010
Posts: 15
|
Definitely, making it a joint effort is great, that will make it even more fun.. And I am always up for learning from others to. Since I know there is some interest I will be bringing sea glass, beads and wire, plenty to share.
|
|
|
03-19-2014, 02:09 PM
|
#928
|
Rivet Master
Currently Looking...
1989 34.5' Airstream 345
Cleveland
, Tennessee
Join Date: Jul 2007
Posts: 787
|
Quote:
Originally Posted by overlander63
Most '73's have a cast aluminum door. Chances are, if it's sprung, it's broken.
I can still show people with a '74 and newer trailer how to bend their doors back into submission. All it takes is two people and a 2x4.
|
Sign me up for this seminar. I'll even bring the door.
It looks like French Fries on the Saturday fish fry, I'll cook the salt potatos on Friday night. If there are any left, They'll make good hash browns on Saturday.
Ricky
__________________
"Sometimes I wonder if the world is being run by smart people who are putting us on, or by imbeciles who really mean it." Mark Twain
AIR 22749 WBCCI 2349 NOVA TAC TN-6
1989 345 LE Classic Motorhome
|
|
|
03-19-2014, 02:16 PM
|
#929
|
Rivet Master
1991 34' Excella
Princeton
, New Jersey
Join Date: Aug 2003
Posts: 7,070
|
Quote:
Originally Posted by moparjohn
OK, long shot, how about a lesson on fixing a sprung door? My 73 Tradewind is not tight where the door meets the sides top or bottom. John
|
Hi John
I have reset my door after it opened twice at road speed. If you don't get help look me up when you get back I still have the form.
__________________
WBCCI 12156 AIR 3144 WACHUNG TAC NJ6
2004 Excursion 4x4
1991 34 ft. Excella +220,000 miles, new laminated flooring, new upholstery, new 3200 lbs axles
|
|
|
03-19-2014, 02:17 PM
|
#930
|
3 Rivet Member
2015 28' Flying Cloud
Ladson
, South Carolina
Join Date: Feb 2004
Posts: 231
|
add sour kraut to the hot dogs!!
__________________
Kathy Narowski
#2555
SC Coastal Unit
TAC-SC5
|
|
|
03-19-2014, 05:30 PM
|
#931
|
Site Team
2007 30' Classic S/O
Somewhere
, South Carolina
Join Date: Apr 2010
Posts: 6,436
|
It takes a "Ski" type to think of adding Kraut to dogs, but shouldn't it be Kielbasa?
I married a Ski so I get to poke a bit of fun at my Ski.
John, We're loading up for doing pancakes again for Sat AM.
Gary
__________________
S/OS #001 2005 Dodge Ram 2500 5.9L 6 Speed
16" Michelins, Hi Spec Wheels, Max Brake, Dexter 4 Piston Disc Brakes, Carslile Actuator, Equal-I-Zer, Dill TPMS. Campfire cook. BMV-712. DEMCO 21K Lb Cast Iron coupler
|
|
|
03-19-2014, 05:42 PM
|
#932
|
3 Rivet Member
2015 28' Flying Cloud
Ladson
, South Carolina
Join Date: Feb 2004
Posts: 231
|
Alumalina 2014
Kapoosta- what "Ski" calls sauerkraut.
Looking forward to those pancakes. They were yummy last time!
__________________
Kathy Narowski
#2555
SC Coastal Unit
TAC-SC5
|
|
|
03-19-2014, 06:36 PM
|
#933
|
Site Team
2007 30' Classic S/O
Somewhere
, South Carolina
Join Date: Apr 2010
Posts: 6,436
|
Kathy,
Babcia says your Kapoosta is just cabbage.
Got a new toy to make pancakes on
Still over a wood fire.
Gary
__________________
S/OS #001 2005 Dodge Ram 2500 5.9L 6 Speed
16" Michelins, Hi Spec Wheels, Max Brake, Dexter 4 Piston Disc Brakes, Carslile Actuator, Equal-I-Zer, Dill TPMS. Campfire cook. BMV-712. DEMCO 21K Lb Cast Iron coupler
|
|
|
03-19-2014, 06:42 PM
|
#934
|
Site Team
2007 30' Classic S/O
Somewhere
, South Carolina
Join Date: Apr 2010
Posts: 6,436
|
Let's try kwasna kapusta.
__________________
S/OS #001 2005 Dodge Ram 2500 5.9L 6 Speed
16" Michelins, Hi Spec Wheels, Max Brake, Dexter 4 Piston Disc Brakes, Carslile Actuator, Equal-I-Zer, Dill TPMS. Campfire cook. BMV-712. DEMCO 21K Lb Cast Iron coupler
|
|
|
03-19-2014, 06:52 PM
|
#935
|
Rivet Master
Hampton
, New Hampshire
Join Date: Oct 2005
Posts: 2,126
|
Quote:
Originally Posted by GCinSC2
Let's try kwasna kapusta.
|
Are we celebrating Kwanzaa?
__________________
Brad (The Slowsky's)
2019 Airstream Classic 30RBT, 2021 Ford F350 King Ranch 4X4 w/6.7L Diesel, Hensley, ACI #1313
travelwiththeslowskys.com
|
|
|
03-19-2014, 07:07 PM
|
#936
|
2 Rivet Member
2018 25' Flying Cloud
camden
, South Carolina
Join Date: Mar 2009
Posts: 21
|
Sea Glass
I will bring some jewelry tools and lots of sea glass. Sounds like fun!
Coming up Thursday evening!
|
|
|
03-19-2014, 07:37 PM
|
#937
|
2 Rivet Member
1964 26' Overlander
Mt. Holly
, North Carolina
Join Date: Nov 2012
Posts: 59
|
Baked beans to accompany the Tube steaks, Corn something or other to slide the Possum down with, Bloody Mary Buffet for Saturday sunrise service and Jesse is contributing his Outlaw on the run D/O Mix mash, Lawd only knows what we'll throw atcha as a side for Fish Camp Saturday! Lisa beat me out of the camper to see what was going on up in here. Iffin y'all couldn't tell by the spelling
__________________
Darrel Lisa & Jesse
WBCCI 11239
|
|
|
03-19-2014, 07:51 PM
|
#938
|
Rivet Master
1997 34' Limited
Young Harris
, Georgia
Join Date: Feb 2003
Posts: 981
|
Quote:
Originally Posted by StreamInn
Hi, I am the other half of GreggH and I create sea glass jewelry. At other rallies I have instructed classes making pieces. If anyone is interested I would be glad to host a small group Saturday. I will bring some wire and pieces of sea glass with me or better yet bring a piece you've found that will be more personal. If interested please advise so I know how many supplies I need to bring.
If you would like to see some examples you can go to my facebook page Island Tides Sea Glass. If anyone has any hand tools for jewelry making that they can bring it would be appreciated. See you soon. Cynthia
|
I would love to learn how to make the sea glass jewelry, count me in, please. I don't have any sea glass though. Thanks!
__________________
Phil and/or Sue w/ Cheryl & Annie and Stuart
(Buffett RIP 9/15/08, Gus RIP 12/22/15)(Roger RIP 12/30/20, Penny RIP 6/14/21)
1997 34' Excella WBCCI 5936
'09 Dodge Cummins Ram 3500 Crew 4x4 auto
AIR 1753
|
|
|
03-19-2014, 08:57 PM
|
#939
|
2 Rivet Member
1991 25' Excella
1971 18' Caravel
Charlotte
, North Carolina
Join Date: Mar 2013
Posts: 88
|
StreamInn -Cynthia, My wife (Anne) has been reading the thread and would like to join your class on Sea Glass. She has some tools that she will bring along.
This will allow her to have some free time rather than trying to keep me out of trouble? If King Possum needs more food (road kill) for dinner, I will be busy flying up and down the back roads gathering food. We are looking forward to this spring Alumalina.
Have a great evening and day.
Big Hooter, we give a hoot.
WBBCI # 21189
|
|
|
03-20-2014, 04:41 AM
|
#940
|
4 Rivet Member
1992 29' Excella
Asheville
, North Carolina
Join Date: Sep 2011
Posts: 306
|
Starting to pack. Looking forward to seeing everyone.
Sent from my GT-N5110 using Airstream Forums mobile app
__________________
Jonathan Hettrick
'92 Excella 29'
'20 Ram 2500
AIR # 59179
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|