Picture 1 is the bracket after I drilled the 4 new mounting holes, be careful of your measurements cuz I guess I sneezed and one hole was off a little, luckily it coverd well.
Picture 2 is of the 8/32 X 3/4 chrome cap screws that I got from a local motorcycle shop, I don't remember the cost of these but it wasn't much.
Picture 3 is of the attachments I used to adapt from 1/2 pigtail to 5/8 gas hook up. On top is the original 5/8 double male elbow, below that is the 1/2 X 5/8 double female and then finally the 1/2 X 1/2 double male.
Picture 4 is of the 1/2 X 5/8 double male just in case I decide to not use the other adapters.
|