Propane lines replaced

[urnmor]

As I have done a lot of maintenance this year on our AS (new domestic fans, new
skylight new sealant, new jack) I decided to also replace the old propane lines. So I installed the the gas-stop propane shutoff values along with the new lines. It was a very easy installation.

[Eagle & Bear]

I have a 1976 AS. Replacing the copper tubing for propane is way over due. I am surprised that the tubing has not worn through as they pass over the axles. Problem is that I cannot find a source for the 5/8 OD "L" rated tubing in anything less than a 60' coil. The 3/8" OD "L" copper is easier to locate but only in 60' coils. Where did you find the copper you used? Similarly, the flex that connects the regulator to the copper is not short enough. Any suggestions as to where to look for the Type "L" copper?

[76argosy]

I redid mine last week. I left the 3/4” (?) trunk line and replaced the 3/8” lines with new product. I had removed the furnace and stove and tried reusing the copper lines from them, mistake! The new lines bent easy and flared easy for this rookie.