Replacing fridge in 1993 Excella 31'

[howell57]

Have a 31" Excella and need to replace fridge. Does anyone know if you can get 4-5 inches at bottom of cabinet housing? I feel a square piece of metal tubing just in back of the bottom woodwork.


Can't find any direct replacement as all models are taller!

[jokila]

Originally Posted by howell57

Have a 31" Excella and need to replace fridge. Does anyone know if you can get 4-5 inches at bottom of cabinet housing? I feel a square piece of metal tubing just in back of the bottom woodwork.


Can't find any direct replacement as all models are taller!

What fridge are you going to buy? You can buy smooth, finished plywood at home depot that you can cut to fit and oak stain. I don't think you have explained your situation well enough to comment further.

[howell57]

Originally Posted by jokila

What fridge are you going to buy? You can buy smooth, finished plywood at home depot that you can cut to fit and oak stain. I don't think you have explained your situation well enough to comment further.

Go a RM3762 which is a 7cubic foot unit and is one inch shorter than 3804! Put a filler piece in at top. 3762 is a dicscontinued model, but my tech found one.