Steering Wheel "Table" for Interstate
I saw these pictures over on Facebook and thought it would be helpful to start a discussion here. Seems like this might be a workable idea for a portable table for the driver position when the vehicle is stopped, engine off, transmission in park and parking brake applied!
Our van is not readily available to check the geometry of the table idea but I'm really enamored with this concept. Anyone have time to check their van and make a carboard mockup or maybe a simple plywood prototype? The thickness of the steering wheel (plastic, leather-wrapped) would impact the width of the slot and the notches. But the tilt-wheel feature may be able to account for some variation.
There must be an Interstate owner that has a small CNC and could crank these out for $20 + S&H.
__________________
Lucius and Danielle
1992 29' Excella Classic / 2010 Interstate
2005 Chevrolet Suburban K2500 8.1L
2018 GMC Sierra K1500 SLT, 6.2L, Max Trailering
Got a cooped-up feeling, gotta get out of town, got those Airstream campin' blues...
|