Atlas - Adding Fresh Water Treatment

[mperry99]

I'm about to take delivery on a 2021 Atlas and am seeking advice on how to add Purogene fresh water treatment to the fresh water tank.

In my 2016 Interstate I just poured it into the inlet. On the Atlas, however, the tank fills from the city water connection by opening an electrically controlled valve.

So, are there any Atlas owners or others who could give me some ideas?

Thanks.

The description of the fill connection is at 4:45 here:

here

.

[Zach05855]

I just pour into the open end of my water hose, then connect to the Hose bib(spigot) and flush the sanitizer along with fresh water into the holding tank.

[Blissful]

mperry99, may I ask you what proportion Purogene/water you use. We use 1 cup per gallon of water for the purpose of mouthwash rinse. I would imagine that you are using a lesser proportion than this. Thanks.

[Zach05855]

Drinking water should be treated at a rate of 1 fl oz (2 tablespoons) of 3R PUROGENE per 30 gallons of water (5 ppm ClO2 concentration)

[mperry99]

I use the 1 oz. per 30 gallon ratio