Two things happening that I think are related to pinched wires in my steering column. It's a 2002 Workhorse Chassis (Gas) that gives me fits. First-when I move the steering column I loose brake lights (left & right) but not the center light. The other is the horn blows constantly, I pull the fuse to make it stop. Has anyone experienced this situation? Has anyone removed the steering column cover to expose the wiring? and what did you do if they are pinched and grounding out? Thanks for your support.
Most of the motorhome owners on Airforums have the older Chevy P30/32 chassis and they likely don't have the same steering column arrangement as your 2003 model. There are a LOT of knowledgeable mechanics here however that most likely will be able to help you out.
Can you post some pictures of what you're referring to? As the old saying goes, pictures are worth a 1000 words .
Brad
__________________
Air forums # 1674
1974 20' Argosy Motor Home
1975 24' Argosy Motor Home
1974 31' Excella trailer (parting out, as of 4/1/2015 I have wheels & windows left to sell)
Brad,
You are correct about pictures. I will post a few to better express my problem. I might have mentioned that it is a 2002 chassis but the coach is 2003. It looks the same as the 2000 chassis dash and steering column that I looked at before I purchased my present 2003. Thanks for your response.
Steve
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.