Quote:
Originally Posted by nutforsilver
Hi Stan My 59 has wraparound dinette in front almost u shape the board to make a bed was laying on the bunk bed when we bought it.I hope to finish the dinette complete wraparound with the back of the sitting area being the part under the window.I will be taking out the larger table an replacing it with a smaller table i think .I have been stripping the paint on the inside front nose (mistake)lots of work.Where is your bathroom? I suppose my is a 59 i have never ran the serial number.I checked on vintage airstream and there was several that looked like mine but without the bunk beds that was a option.Good luck with your project you will find this site to be a good resource. PERRY
|
Our trailer is almost identical to the 18D0204 trailer in the '59 photo archives (at Vintageairstream.com), with the diagram labeled "Globester", with 2 exceptions: We now have a dinette in the front which was done by a previous owner and our bed looks like the picture which is attached (I hope). Our serial number also begins with 18D. The bed configuration is very handy because it opens up a lot of space for day use.
I finished removing the floor today so I'm making progress. FYI, there is no structural support at the foot of the door opening except for the plywood. I found out the hard way and will be replacing part of the belly pan.
Stan