|
|
08-06-2017, 08:21 PM
|
#1
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
63 Overlander project ???
Well I had asked a guy if he would be willing to sell this Overlander. I had seen it while I was riding my bike. After a few months of him thinking about it we struck a deal. Got it home and there were more things wrong than I expected but it's an Airstream and it's about 60% unmolested so it's a good start. Missing the Fridge cabinet and the toilet pedestal/tank. Half painted inside of course and cabinets have quite a bit of delamination but at least they are there for templates..
|
|
|
08-06-2017, 08:29 PM
|
#2
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
Day 1 reno.
Pulled full size toilet out...... subfloor over original floor in the whole trailer. Pulled barroom cabinet. Lots of rot... shower floor seems to be solid but can see rot behind it so it's got to come out.
|
|
|
08-06-2017, 08:32 PM
|
#3
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
Previous owner had turned streetside bed into a counter top with a home 24 gallon hot water heater inside the cabinet
|
|
|
08-06-2017, 08:44 PM
|
#4
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
Rot also around sill plate front door and front corners below windows.
Electrical works. AC even kicked on..... 😊😊😊😊. I only let it run for a second, until someone can look at it and service it. Original hot water heater gone of course and fresh water holding tank gone. Plan is to put the street side bed back to simi original and hide fresh water tank behind it and put a new hot water tank back in place. Re plumb the whole thing. Black tank of course not sure about a Grey tank yet.
|
|
|
08-06-2017, 08:53 PM
|
#5
|
Rivet Master
1977 31' Sovereign
Vintage Kin Owner
Vintage Kin Owner
Sunset Valley
, Texas
Join Date: Jul 2016
Posts: 744
|
Plan for a grey tank. Easier to do it now then regret not doing it later.
Ian
|
|
|
08-06-2017, 09:22 PM
|
#6
|
3 Rivet Member
1969 27' Overlander
Boise
, Idaho
Join Date: Apr 2013
Posts: 150
|
A trailer that old in your part of the country, I'd expect rot pretty much everywhere.
|
|
|
08-06-2017, 10:46 PM
|
#7
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
Quote:
Originally Posted by Iansk
Plan for a grey tank. Easier to do it now then regret not doing it later.
Ian
|
Any rule of thumb on gray tank, black tank, fresh water tank size/capacity??
|
|
|
08-07-2017, 11:05 AM
|
#8
|
3 Rivet Member
Currently Looking...
belen
, New Mexico
Join Date: Jan 2012
Posts: 191
|
And those tailights ! Eeek!
|
|
|
08-07-2017, 12:43 PM
|
#9
|
Rivet Master
2019 25' International
Washington
, Washington, D.C.
Join Date: Oct 2014
Posts: 1,271
|
Ah, so that's what floor rot looks like. What a project you've taken on!
|
|
|
08-07-2017, 09:12 PM
|
#10
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
They are gone lol...took them off yesterday. Old ones were in the trailer with the lens. They had wired the square ones as substitutes. I will have to to check the stock wires and harness to figure out why the discarded them.
|
|
|
08-08-2017, 05:35 AM
|
#11
|
Rivet Master
1977 31' Sovereign
Vintage Kin Owner
Vintage Kin Owner
Sunset Valley
, Texas
Join Date: Jul 2016
Posts: 744
|
Depends...
Quote:
Originally Posted by Endl
Any rule of thumb on gray tank, black tank, fresh water tank size/capacity??
|
I think the only "rule of thumb" would be frame related (as in: what will the frame hold and/or what modifications are you willing or able to make). Your coach looks to be longish? 28-31'?
On my '78 Avion 28', it has 65/30/40 f/g/b, but the frame is built like a shick brit house compared to my '77 Airstream 31' at 50/16/20. These two trailers have the tanks below the floor in between the frame rails. On my '64 Silverstreak, everything was above the floor, 25 gal fresh and maybe 20 gal black, no grey tank.
There are many threads related to the addition of a grey water tank but until you have direct access to your frame, it'll be hard to determine the size and optimal placement.
Ian
|
|
|
08-08-2017, 06:08 AM
|
#12
|
Rivet Master
1966 26' Overlander
Woodstock
, Georgia
Join Date: Feb 2002
Posts: 8,525
|
looks like asbestos floor tiles. Be aware of their danger to your health..
My trailer had minimal floor rot and was a Southern Overlander most of the past 30 years, but it had been sealed well at some point which made a difference. Good luck to you on your restore.
|
|
|
08-09-2017, 05:54 AM
|
#13
|
Rivet Master
1959 26' Overlander
Western
, Massachusetts
Join Date: Sep 2005
Posts: 1,468
|
Quote:
Originally Posted by Endl
Any rule of thumb on gray tank, black tank, fresh water tank size/capacity??
|
No rule of thumb. Keep in mind that water weighs 8 1/3 pounds per gallon.
We have had good results with 28g Fresh --under a dinette seat forward, 12g black (original size) and 30g grey.
|
|
|
08-09-2017, 06:32 AM
|
#14
|
Rivet Master
1955 22' Safari
Laredo
, Texas
Join Date: Nov 2013
Posts: 1,342
|
Tank sizes
I have original fresh tank (30 gal I think)
Original black tank (size unknown)
New gray tank is 30 gallons since that size fit comfortably in the space available without hanging low enough to be a liability. It was custom made so I was free to choose any size I wanted.
|
|
|
08-10-2017, 07:26 PM
|
#15
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
Bathroom removed, wall panels, floor.... now to repair the rear chanel and floor.
|
|
|
08-10-2017, 07:36 PM
|
#16
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
Rear bath removed, wall panels, floor from 3 cross member back. Like the shine on the walls.... insulation was in good shape. Part of the rear cross member is in bad shape and needs replaced. Might do both of the rear crossmembers depending on gray water tank. Wonder why they did not have a street side outrigger when the black water tank was right above that area?
|
|
|
08-15-2017, 10:00 AM
|
#17
|
Rivet Master
1991 34' Excella
1963 26' Overlander
1961 26' Overlander
Central
, Mississippi
Join Date: Nov 2006
Posts: 5,919
|
Quote:
Originally Posted by Endl
... Wonder why they did not have a street side outrigger when the black water tank was right above that area?
|
I added one, a short piece of angle iron. Make sure and taper the end or it will poke thru the belly wrap...like mine did!
|
|
|
08-17-2017, 10:09 PM
|
#18
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
Cross member
I bought 3/16 channel for the rusted rear cross member. Seems heavy.... any better ideas out there
|
|
|
08-18-2017, 04:42 PM
|
#19
|
Rivet Master
1991 34' Excella
1963 26' Overlander
1961 26' Overlander
Central
, Mississippi
Join Date: Nov 2006
Posts: 5,919
|
I've been using 2 x 4" by .125 thick tube for replacement cross members. It works great on either side of a gray tank install.
|
|
|
08-18-2017, 10:18 PM
|
#20
|
2 Rivet Member
2005 28' International CCD
1968 24' Tradewind
Alexander
, Arkansas
Join Date: Apr 2014
Posts: 42
|
That is about .82 lighter per foot if I figured that correct. So a little over 13oz per foot. I come Up with about 4.1 pounds on 5 feet. My measurements are around 58" for the crossmember.
Why is the font of the chassis box steel and then it turns into channel...... I guess that's where/why the rear sag comes from...
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|