Thanks for the support from the forum...
Posted 10-17-2010 at 10:42 PM by Trex
Just wanted to say thanks to the Andy and the Guys on the forum side of this web site
I pulled the water damaged plywood out of the front today. My new 4” grinder works great. Tomorrow I will clean up the support “C” rails, and cut the new subfloor and paint before I re-install.
If anyone out there has replaced subflood, feel free to comment on my thread below.
I have photos posted under Repairing Floors and frames "Something rotten in River City"
I pulled the water damaged plywood out of the front today. My new 4” grinder works great. Tomorrow I will clean up the support “C” rails, and cut the new subfloor and paint before I re-install.
If anyone out there has replaced subflood, feel free to comment on my thread below.
I have photos posted under Repairing Floors and frames "Something rotten in River City"
Total Comments 2
Comments
-
Posted 11-27-2010 at 05:08 AM by mello mike -
Rear end separation
Quote:Originally Posted by mello mikeEnjoy yourself, Rex, and take your time. Looks like you're well on your way. Does your Sovereign have any sign of rear end separation?
Yes, there are signs of the standard repair on the outside skin in the rear. There are two Alum. patches on each side of the rear door, above the bumper. Not sure when the PO had this done. But I think it was when they painted the damm trailer 10 to 20 years ago, (Silver).
Its raining today pretty hard, but I will post some photos when its a little nicer. I think I will post the photos on my on-going Thread under the "Sub-Forum" Sovereign; 1972; "Baby needs new shoes". I want to try to keep my posts in one location. You have a 72 don't you? Trex "May Wally be with you"Posted 11-27-2010 at 11:28 AM by Trex