Fresh water tank
Posted 09-24-2011 at 02:22 PM by oilcan
Quote:
|
Originally Posted by Tom Nugler
Sorry, but you’ll need to brush up on your metalworking skills. You can’t put a square duct in a round hole without modifying the original plenum.
Here’s a good thread on the procedure. https://www.airforums.com/forums/f427...0sp-41537.html Good luck, Tom. |
You sure seem like you a good source to fire question at so here goes, I have a 27' Overlander international and am thinking about replacing the fresh water tank if not a major task. Got any suggestions?
Thanks in advance,
Oilcan
Total Comments 0
