Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Rate this Entry

Configuring the Orion XS

Posted 05-30-2024 at 10:18 AM by MRA

Quote:
Originally Posted by JeffKim View Post
You can look at the electrical diagram to determine the gauge but on ours and I'd guess it's the same on almost all recent trailers it's 10AWG. If you look at a wire gauge calculator drawing 30A you can go a maximum of 10' with 10AWG, which I'd guess is long enough to get from the 7-pin to the XS with the stock wire, otherwise it would take some beefier wire or set the XS to a lower input. I have our XS positioned fairly close to the positive bus bar and fused at 40A, so 10AWG is good as well although I only draw 15A (our TV is fused at 15A).
I am worried about the wire gauge and distance from the tvís fuse to the 7pin - while I can guess the distance; I canít see the wire, as itís in a bundle. I do think you are on to something on 10ga as it appears to be the SAE minimum spec. I guess I could start there and do some trial and error as the worst that happens is I blow the TV fuse, and fuses are relatively cheap.
Posted in Uncategorized
Views 47 Comments 0
« Prev     Main     Next »
Total Comments 0

Comments

 
Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.



All times are GMT -6. The time now is 03:33 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.