Another Small Step
Posted 04-10-2010 at 06:26 PM by Clyde-2
Doesn't look like much, but I reinstalled the water tank and plywood supports. Water level sensors are all working and lights in control panel as well. New pump is roughed in but will wait till kitchen counter assembly is back in place prior to anchoring it. I'm not putting the propane furnace back in so I should have plenty of room under there. NOTE: for any of you out there planning on removing and reinstalling your water tank....use a floor jack to hold it(tank) up then slide the plywood about half way in. From there you can get it all in place. Do this with help !!! I did it by myself but it was a PITA.
Posted in Restoration Blogs, 1972 27' Overlander RestorationViews 1150 Comments 0
Total Comments 0