81,846 Miles Later
|
Description |
In 2006, a couple of years after my '67 Overlander was woken from its 22 year slumber, I purchased new, loaded axles from Inland Andy. My Airstream appeared to benefit from the purchase. Tons of fun memories over the years. Although the coach's tires are replaced every six years or so the brakes were only checked through the inspection hole in the back. Until today. 81,846 miles later, after removing the drums since the tires were removed for replacement, I was happy to see that all was good even though it was best to replace the brakes. Etrailer's new loaded backing plates & seals will arrive in a couple of days. In the mean-time I will start remembering how I used to clean & repack bearings! Here's to another chapter in my Overlander's life! |
User |
TomW |
Category |
Airstream Trailer Photos |
Dimensions |
1024 x 771 |
2040 x 1536
|
|
|
1946 Invader, I Just Purchased.
|
Description |
Aluminum counter and cabinets? I am sold. Can't wait to revitalize this part of history. |
User |
Howdy |
Category |
my photos |
Dimensions |
1024 x 768 |
1679 x 1259
|
|
|
|
Door Lock Parts Needed For 1988 Airstream
|
Description |
I am enclosing pics of the current exterior/interior main door lock that I have on my trailer. The photo of the tiny part that you see is what I need to rebuild the lock I have and also, I need an interior handle that will fit on that piece I need. That piece has broken in half…
If you don’t have that particular piece, then would you have an entire door lock kit? I have purchase one, but it does not fit the hole I have and came with a plate to cover the hole I am not happy with the look of.
Thank you so much!
Here is a pic of my existing exterior door lock…the exterior of it and the inside of it…you will see that tiny square in the middle of the inside of the lock is what I need. I am also including pics of that piece separate to these pics…AND…I need a handle to fit that for the interior.
Thank you so much! If you don’t have, would you know of someone else I might contact? I have tried Inland RV and Colaw RV Parts.
Is there a graveyard for airstreams somewhere???? |
User |
jennydp |
Category |
1980's Airstream Trailers |
Dimensions |
480 x 640
|
|
Door Lock Parts Needed For 1988 Airstream
|
Description |
I am enclosing pics of the current exterior/interior main door lock that I have on my trailer. The photo of the tiny part that you see is what I need to rebuild the lock I have and also, I need an interior handle that will fit on that piece I need. That piece has broken in half…
If you don’t have that particular piece, then would you have an entire door lock kit? I have purchase one, but it does not fit the hole I have and came with a plate to cover the hole I am not happy with the look of.
Thank you so much!
Here is a pic of my existing exterior door lock…the exterior of it and the inside of it…you will see that tiny square in the middle of the inside of the lock is what I need. I am also including pics of that piece separate to these pics…AND…I need a handle to fit that for the interior.
Thank you so much! If you don’t have, would you know of someone else I might contact? I have tried Inland RV and Colaw RV Parts.
Is there a graveyard for airstreams somewhere???? |
User |
jennydp |
Category |
1980's Airstream Trailers |
Dimensions |
1024 x 768 |
3264 x 2448
|
|
Door Lock Parts Needed For 1988 Airstream
|
Description |
I am enclosing pics of the current exterior/interior main door lock that I have on my trailer. The photo of the tiny part that you see is what I need to rebuild the lock I have and also, I need an interior handle that will fit on that piece I need. That piece has broken in half…
If you don’t have that particular piece, then would you have an entire door lock kit? I have purchase one, but it does not fit the hole I have and came with a plate to cover the hole I am not happy with the look of.
Thank you so much!
Here is a pic of my existing exterior door lock…the exterior of it and the inside of it…you will see that tiny square in the middle of the inside of the lock is what I need. I am also including pics of that piece separate to these pics…AND…I need a handle to fit that for the interior.
Thank you so much! If you don’t have, would you know of someone else I might contact? I have tried Inland RV and Colaw RV Parts.
Is there a graveyard for airstreams somewhere???? |
User |
jennydp |
Category |
1980's Airstream Trailers |
Dimensions |
1024 x 768 |
3264 x 2448
|
|
Door Lock Parts Needed For 1988 Airstream
|
Description |
I am enclosing pics of the current exterior/interior main door lock that I have on my trailer. The photo of the tiny part that you see is what I need to rebuild the lock I have and also, I need an interior handle that will fit on that piece I need. That piece has broken in half…
If you don’t have that particular piece, then would you have an entire door lock kit? I have purchase one, but it does not fit the hole I have and came with a plate to cover the hole I am not happy with the look of.
Thank you so much!
Here is a pic of my existing exterior door lock…the exterior of it and the inside of it…you will see that tiny square in the middle of the inside of the lock is what I need. I am also including pics of that piece separate to these pics…AND…I need a handle to fit that for the interior.
Thank you so much! If you don’t have, would you know of someone else I might contact? I have tried Inland RV and Colaw RV Parts.
Is there a graveyard for airstreams somewhere???? |
User |
jennydp |
Category |
1980's Airstream Trailers |
Dimensions |
1024 x 768 |
3264 x 2448
|
|
Disclaimer:
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.
All times are GMT -6. The time now is 02:30 PM.