Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Chuck has dreams of polishing aluminumChuck has dreams of polishing aluminum

Chuck Chuck is offline

Patriotic

Profile Comments

Showing Profile Comments 1 to 10 of 13
  1. gomotomoto
    Hi Chuck! Just read through most of your post. Any chance I can hire you to do some consulting for my grey/black tank upgrades? Seems you've learned alot that could be of value! Please let me know. Best, Adam
  2. Greg1410
    09-14-2015 07:16 PM
    Greg1410
    Great - so the hole I make in the tank for the sink draining in will also serve as my vent - that seems to make sense.
    To drain the shower, I will have to come it to the side of the tank (near the top edge); correct? Don't see any other way unless I really raise up the shower pan.
    Then to drain, I will need to come out the side of the tank (toward the bottom edge).
    I remember you said in your post you were going to make the waste valve easy to get at - how did you arrange that?
    Thanks for your help.
    Greg
  3. Greg1410
    09-10-2015 01:54 PM
    Greg1410
    Hi Chuck:I have a 1973 Safari as well and am doing a full restoration- pretty new at all of this. I have followed your floor thread. I would like to install a gray tank between the cross members as you did; but I will probably just do one. I would love to see your plumbing layout of this if you would not mind sharing. I need to order my tank and let them know where to put the holes - so any help there would be appreciated. Also, did you tie into an existing vent or do a new one?Thanks!Greg
  4. X New Yorker
    Hi Chuck - I just purchased my first RV - a Airstream International. I'm located in Springfield, MA would like to join your group. Thanks, Clara West
  5. Maggiefoss
    Hi- i was looking at your pictures and noticed you have a 73 safari just like mine. Did you replace the carpet with laminate? Was it hard to do? i have to find a replacement for the waste line. Is that hard to find? thanks for your help. Maggie
  6. rptradewind
    Hi, I started a thread yesterday announcing a rally, "Lone Star VAC Campout" under WBCCI rallies. We ran into a conflict and need to change the dates of the rally to May 7, 8 and 9, 2010. How can I edit the innitial thread? Pat McDowell
  7. Kistler
    03-24-2010 01:35 PM
    Kistler
    Hi, I/we just got an email from "Save Wally".....I have forgotten how to post on the airforum but I would like to know if others are getting this email.....

    Why should I/we wish to "Save Wally"?

    My personal opinion is that WBCCI officers should NOT receive money to attend meetings....

    Larry Ryan
    aka Kistler on the airforum
  8. Frank's Trailer Works
    glad to see you gave up your sad statis
  9. Frank's Trailer Works
    Chuck, I hope you are the same Chuck that commented on my blog. I am interested in the hatch you mentioned. Also, why are you the sad moderator?
  10. C5Don
    11-14-2008 08:52 AM
    C5Don
    Chuck,

    It was recommended I get set up as a "Commercial Vendor" and this could be done by contacting any name in bold at the bottom of the portal page. Is there anything I need to do other then sending this message, and if so, just let me know.

    Regards,
    Don

About Me

  • About Chuck
    City
    North of Boston
    State/Province
    Massachusetts
    Country
    UNITED STATES
    Gender
    male
    WBCCI #
    3752
    Trailer #1
    1973 23' Safari
    About My Tow Vehicle
    '00 Dodge Ram 1500 4x4
  • Signature
    Air:291
    Wbcci: 3752
    '73 Safari 23'
    '00 Dodge Ram 1500 4x4 QC

Statistics

Total Posts
Profile Comments
Blog
General Information
  • Last Activity: 09-18-2021 09:58 PM
  • Join Date: 05-27-2002
  • Referrals: 1

Friends

Showing Friends 1 to 13 of 13
Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.



All times are GMT -6. The time now is 10:11 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.