Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-12-2004, 11:49 AM   #29
Rivet Master
 
Ken J's Avatar
 
1956 22' Flying Cloud
Durango , Colorado
Join Date: Sep 2002
Location: 1975 25' Tradewind
Posts: 3,396
Images: 14
Getting there

Got the final coat on the frame and first of floor sections in - making progress - using a little leverage to lift the frame makes it really easy to push the floor under the frame.

I also spent 98 cents each for conduit to run brake wires. Will also use it to run the a/c wire to the fuse box.

Ken
Attached Thumbnails
Click image for larger version

Name:	Floor going in.JPG
Views:	221
Size:	24.3 KB
ID:	8694   Click image for larger version

Name:	Leverage.JPG
Views:	234
Size:	27.8 KB
ID:	8695  

Click image for larger version

Name:	conduet.JPG
Views:	227
Size:	28.4 KB
ID:	8696  
__________________

__________________
1956 Flying Cloud
Founder :
Four Corners Unit
Albuquerque National Balloon Fiesta
Rally
Vintage Trailer Academy - Formerly the original
restoration rally
Ken J is offline   Reply With Quote
Old 09-12-2004, 05:15 PM   #30
uwe
418
 
uwe's Avatar
 
2007 25' Safari FB SE
1958 22' Flying Cloud
1974 29' Ambassador
Yucca Valley , California
Join Date: Jun 2002
Location: 1963 26' Overlander
Posts: 4,767
Images: 41
Send a message via Skype™ to uwe
Quote:
Originally Posted by flyfshr
Yeah, but then, so is a fire

FF
I know it seems that heat is heat, but our climate gets humid in September, and it's the first time that 90F has bothered me.
Usually I just bring a few gallons of water to drink and go for it, slowly.
Welding in the heat sucks, though.
__________________

__________________
Uwe
www.area63productions.com
uwe is offline   Reply With Quote
Old 09-12-2004, 05:17 PM   #31
uwe
418
 
uwe's Avatar
 
2007 25' Safari FB SE
1958 22' Flying Cloud
1974 29' Ambassador
Yucca Valley , California
Join Date: Jun 2002
Location: 1963 26' Overlander
Posts: 4,767
Images: 41
Send a message via Skype™ to uwe
Quote:
Originally Posted by Ken J
Got the final coat on the frame and first of floor sections in - making progress - using a little leverage to lift the frame makes it really easy to push the floor under the frame.

I also spent 98 cents each for conduit to run brake wires. Will also use it to run the a/c wire to the fuse box.

Ken
Hey Ken, this looks great! Don't hurt yourself...
__________________
Uwe
www.area63productions.com
uwe is offline   Reply With Quote
Old 09-12-2004, 06:50 PM   #32
Rivet Master
 
Ken J's Avatar
 
1956 22' Flying Cloud
Durango , Colorado
Join Date: Sep 2002
Location: 1975 25' Tradewind
Posts: 3,396
Images: 14
Thanks - I feel better about it as each piece goes in - pretty unstable with the whole floor out. I'll update again when floor is in.

Ken
__________________
1956 Flying Cloud
Founder :
Four Corners Unit
Albuquerque National Balloon Fiesta
Rally
Vintage Trailer Academy - Formerly the original
restoration rally
Ken J is offline   Reply With Quote
Old 02-24-2005, 06:10 PM   #33
Rivet Master
 
Ken J's Avatar
 
1956 22' Flying Cloud
Durango , Colorado
Join Date: Sep 2002
Location: 1975 25' Tradewind
Posts: 3,396
Images: 14
An update.....

It has been a while since I updated this thread......

Winter got me as I was trying to get the floor done. I had a little epoxy problem in that I could not get a section of epoxy to fully cure. So that was it for floor replacement till spring. I waited several months for the epoxy to cure - talked to all kinds of experts on it and finally heated/scraped the old epoxy, put a new coat on and let it cure in a room that I heated to 80 degrees. Since the fall I have completed all the interior cabinets, installed new tail lights (about a month before I found out reproduction lenses were being made again ) - they are nice stainless steel so they should work pretty good, fixed the wheel wells, and rebuilt all the interior lighting.

I've done about everything I can do until spring, so I'm on hold till then. At that time I'll get the floor bolted down, then all new running gear, belly pan and polish. Hopefully by late summer I'll be able to get into the interior and install all these new cabinets that I have scattered all over the house. - as you can tell from the picture of my dining room full of Airstream cabinets.
Attached Thumbnails
Click image for larger version

Name:	Lamps.JPG
Views:	181
Size:	34.0 KB
ID:	10585   Click image for larger version

Name:	s coming to dinner.JPG
Views:	170
Size:	33.1 KB
ID:	10586  

Click image for larger version

Name:	New tail light.JPG
Views:	145
Size:	23.4 KB
ID:	10587   Click image for larger version

Name:	Wheel wells.JPG
Views:	191
Size:	28.8 KB
ID:	10588  

__________________
1956 Flying Cloud
Founder :
Four Corners Unit
Albuquerque National Balloon Fiesta
Rally
Vintage Trailer Academy - Formerly the original
restoration rally
Ken J is offline   Reply With Quote
Old 02-24-2005, 07:36 PM   #34
Rivet Master
 
Ken J's Avatar
 
1956 22' Flying Cloud
Durango , Colorado
Join Date: Sep 2002
Location: 1975 25' Tradewind
Posts: 3,396
Images: 14
Clock restoration

I even had some time to restore this cool clock I got from ebay for the trailer
Attached Thumbnails
Click image for larger version

Name:	Clock.JPG
Views:	135
Size:	25.8 KB
ID:	10589  
__________________
1956 Flying Cloud
Founder :
Four Corners Unit
Albuquerque National Balloon Fiesta
Rally
Vintage Trailer Academy - Formerly the original
restoration rally
Ken J is offline   Reply With Quote
Old 03-16-2005, 09:13 PM   #35
3 Rivet Member
 
58BUBBLE's Avatar
 
Join Date: Jul 2004
Posts: 105
Images: 9
Hi Guys, I really like the plywood you used on your floor. I am doing mine soon with the epoxy on the edges-good idea! Where can I buy the acx, doug fir? Is there a difference between this and marine grade? I want to use a good wood but dont want to break the bank either, any suggestions? TIA
58BUBBLE is offline   Reply With Quote
Old 03-17-2005, 11:03 AM   #36
Rivet Master
 
Ken J's Avatar
 
1956 22' Flying Cloud
Durango , Colorado
Join Date: Sep 2002
Location: 1975 25' Tradewind
Posts: 3,396
Images: 14
I purchased my ACX at a local lumberyard - I live in a rural area, so I know it would be very easy to find in Salt Lake. Salt Lake has a large plywood dealer that sells marine - if you need the name, let me know. Anyway, I don't think you need marine. The glue in marine is the same as ACX - the core layers are a little better than ACX - the big difference is that marine does not have any voids in layers so it makes for easier bending. Since the trailer floor is flat, there is really no need for marine. The cost for ACX if pretty reasonable - if I remember I think I paid about $40 per sheet for 5/8".

Also another tip, buy your epoxy from Fiberglass coatings in Florida - much cheaper than West Marine and all epoxy is basically the same - also be careful with mixing and temp - as I found out the hard way - easy stuff to use as long as you follow directions - epoxy is very toxic so wear a resporator

Ken
__________________
1956 Flying Cloud
Founder :
Four Corners Unit
Albuquerque National Balloon Fiesta
Rally
Vintage Trailer Academy - Formerly the original
restoration rally
Ken J is offline   Reply With Quote
Old 03-17-2005, 08:03 PM   #37
uwe
418
 
uwe's Avatar
 
2007 25' Safari FB SE
1958 22' Flying Cloud
1974 29' Ambassador
Yucca Valley , California
Join Date: Jun 2002
Location: 1963 26' Overlander
Posts: 4,767
Images: 41
Send a message via Skype™ to uwe
I used ACX also, worked out fine so far.
I sealed every panel with a few coats of Varathane.
__________________
Uwe
www.area63productions.com
uwe is offline   Reply With Quote
Old 03-17-2005, 09:09 PM   #38
Site Team
 
, Minnesota
Join Date: Aug 2003
Posts: 7,315
Images: 59
I used 3/4" ACX, edge sealed with epoxy.
markdoane is offline   Reply With Quote
Old 03-17-2005, 09:49 PM   #39
3 Rivet Member
 
58BUBBLE's Avatar
 
Join Date: Jul 2004
Posts: 105
Images: 9
ACX it is then. You guys are my mentors. Don, I really liked your "Shell On" floor replacement idea but in the end I decided to go with "The Full Monte". Thanks for the help and stay tuned because I will definently have more questions.
58BUBBLE is offline   Reply With Quote
Old 06-18-2005, 08:00 PM   #40
Rivet Master
 
Ken J's Avatar
 
1956 22' Flying Cloud
Durango , Colorado
Join Date: Sep 2002
Location: 1975 25' Tradewind
Posts: 3,396
Images: 14
Progress!!!

Floor is now done and I've done a first pass polish on the stree side. Starting to look like a trailer again.

Next project is new axles, then belly....

Ken J.
Attached Thumbnails
Click image for larger version

Name:	0020.jpg
Views:	331
Size:	24.9 KB
ID:	12931   Click image for larger version

Name:	0022.jpg
Views:	234
Size:	23.1 KB
ID:	12932  

Click image for larger version

Name:	0023.jpg
Views:	292
Size:	39.9 KB
ID:	12933   Click image for larger version

Name:	0028.jpg
Views:	292
Size:	54.5 KB
ID:	12934  

__________________
1956 Flying Cloud
Founder :
Four Corners Unit
Albuquerque National Balloon Fiesta
Rally
Vintage Trailer Academy - Formerly the original
restoration rally
Ken J is offline   Reply With Quote
Old 06-18-2005, 11:31 PM   #41
uwe
418
 
uwe's Avatar
 
2007 25' Safari FB SE
1958 22' Flying Cloud
1974 29' Ambassador
Yucca Valley , California
Join Date: Jun 2002
Location: 1963 26' Overlander
Posts: 4,767
Images: 41
Send a message via Skype™ to uwe
Yeah!

Looking good there, Ken.
Did you get the metal for the belly covering yet?
__________________
Uwe
www.area63productions.com
uwe is offline   Reply With Quote
Old 06-18-2005, 11:42 PM   #42
4 Rivet Member
 
greg176's Avatar
 
1961 26' Overlander
Gabriola Island , British Columbia
Join Date: Aug 2003
Posts: 474
Images: 1
Looks great. What did you use to polish?
__________________

greg176 is offline   Reply With Quote
Reply

Tags
1958, 1958 overlander


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1958 Airstream Overlander caribbeanbum 1954 - 1959 Overlander 5 02-14-2005 11:19 AM
1958 Overlander Dometic bwdbrn1 Refrigerators 15 09-14-2004 01:04 PM
1964 Airstream Overlander MW64OVERLANDER 1960 - 1964 Overlander 10 01-04-2004 04:07 PM
Help! Bathroom Restoration jdleezer General Interior Topics 3 07-26-2003 11:59 AM
1958 Airstream Overlander caribbeanbum 1954 - 1959 Overlander 0 12-08-2002 09:30 PM


Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 02:24 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.