Update TPMS repeater location
I installed the repeater on the side of the cabinet over the sink as in the photos. This is a temporary set up to insure that the location provides the proper transmission of the signal from the wheels. The repeater is held on to the trim with double sided tape at this time. I picked up the pos and neg 12 V from the feed to the fluorescent light under the counter. I ran the wire between the bottom of the cabinet and the floor of the cabinet so as notto interfere with anything in the cabinet and to keep out of sight. NOTE: The positive wire is the black wire, not the white as everywhere else in this world (Don't ask me how I know). If this is the final location I will add a toggle switch in the line so as not to have a constant draw on the batteries.
__________________
2015 GMC Denali 2500, 4x4, Duramax diesel, Topper, Pro Pride 3 P, Sendel 16" with Michelin LTs, one Yellow Labrador Retriever (AS security)
|