Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-11-2015, 09:15 PM   #645
BAB
Rivet Master
 
BAB's Avatar

 
2015 30' Classic
2012 28' International
Greensboro , North Carolina
Join Date: Aug 2011
Posts: 1,574
....and the responsible party to answer that question ought to be the manufacturer of our trailers, though they would probably say that Dexter does the wheels so they should make the call.
__________________

__________________
_________________
"SilverLeaf II" 2015 30' Classic
2014 RAM 2500 Laramie 4x4 CC w/6.7L Cummins
ProPride 3P
AIR# 58452
WBCCI # 3430-Unit 21
BAB is offline   Reply With Quote
Old 05-11-2015, 09:54 PM   #646
3 Rivet Member

 
2015 30' Flying Cloud
2016 30' Classic
Covington , Louisiana
Join Date: Jan 2014
Posts: 176
Quote:
Originally Posted by ghaynes755 View Post
SJ for the torque wrench I have one from Lowes. Goes to 250ft/lb which I need for my ProPride. Reasonable price. Also the Airstream store sells a nice one. If I didn't have the one from Lowe's I would have bought the one they offer. Had a nice price.
Thank you so much for the information.
__________________

__________________
Sjcjr is offline   Reply With Quote
Old 05-15-2015, 09:41 AM   #647
Rivet Master
 
Remax gal's Avatar
 
2014 27' FB Eddie Bauer
Lake Placid , Florida
Join Date: Aug 2013
Posts: 641
What has everyone done about the shades hitting the window knob? Driving me crazy and scared to death someone is going to force the shade and tear it up. Would appreciate any info on this! Thanks!


Laura & Tom
__________________
Let the good times roll!! Laura
Remax gal is offline   Reply With Quote
Old 05-15-2015, 11:14 AM   #648
2 Rivet Member
 
2017 30' Classic
Lexington , Kentucky
Join Date: Oct 2002
Posts: 97
Images: 2
I have exactly the same question.
__________________
wlanford is offline   Reply With Quote
Old 05-15-2015, 11:14 AM   #649
BAB
Rivet Master
 
BAB's Avatar

 
2015 30' Classic
2012 28' International
Greensboro , North Carolina
Join Date: Aug 2011
Posts: 1,574
See post #337. Everyone has this issue. It is a PITA to have to take each one off and cut them smaller/drill hole deeper, but it's the easiest fix to this annoying problem. The good news is that I don't have the problem anymore.



Sent from my iPad using Airstream Forums
__________________
_________________
"SilverLeaf II" 2015 30' Classic
2014 RAM 2500 Laramie 4x4 CC w/6.7L Cummins
ProPride 3P
AIR# 58452
WBCCI # 3430-Unit 21
BAB is offline   Reply With Quote
Old 05-15-2015, 12:37 PM   #650
Airstreaming Pagey
 
Pagey's Avatar

 
2015 31' Classic
Green Cove Springs , Florida
Join Date: Jan 2013
Posts: 339
We have found that being patient and pulling the blinds slightly toward us as we open and close them works just fine for us.
__________________
Page

May your days be filled with love and laughter.
Pagey is offline   Reply With Quote
Old 05-15-2015, 01:55 PM   #651
Firedog1
 
Firedog1's Avatar
 
2015 30' Classic
Woodbridge Connecticut & , Venice Florida
Join Date: Mar 2013
Posts: 206
When I was at factory we had them remove, drill, and replace knobs. Work fine now
__________________
Russ and Lisa
2015 Classic 30
2015 F250 King Ranch 4x4 turbo diesel

Sold but not forgotten: 2005 Classic 25 Limited
Firedog1 is offline   Reply With Quote
Old 05-16-2015, 08:16 AM   #652
BAB
Rivet Master
 
BAB's Avatar

 
2015 30' Classic
2012 28' International
Greensboro , North Carolina
Join Date: Aug 2011
Posts: 1,574
The easier and smoother these work, the less likely we'll have issues later on. My experience with the Oceanair shades on my Intl CCD was the necessity of great caution....rolling the shade ABSOLUTELY straight in the cassette was essential....because if you didn't and hit either edge as it rolled in: instant edge fraying. One of the reason I replaced the kitchen Oceanair with an aluminum mini-blind! The only shade left is in the small one on the bathroom window.
__________________
_________________
"SilverLeaf II" 2015 30' Classic
2014 RAM 2500 Laramie 4x4 CC w/6.7L Cummins
ProPride 3P
AIR# 58452
WBCCI # 3430-Unit 21
BAB is offline   Reply With Quote
Old 05-16-2015, 02:15 PM   #653
3 Rivet Member
 
Rawn77's Avatar
 
2017 30' Classic
Montreal , Quebec
Join Date: Jun 2009
Posts: 211
Send a message via Skype™ to Rawn77
I was wondering if any of you has experienced problems using the propane furnace? Mine works well but it stays on for a long time; raising the temperature well above what's been set. I have it set to 65 at night, but the interior will get close to 75-80 before you here the flame turn off (of course the fan will continue on a bit).
It doesn't make for a comfortable environment

Anyone else experience similar issues?

Ron
__________________
Ron
Montreal, QC

2017 Classic
4 Flexible 100w Solar Panels
3000w Magnum Hybrid Inverter
1000 Amp Hours Lithium Battery
Honda EU3000
Drain Master Sewer Connection
2017 GMC Denali 2500 Duramax
Hensley
Rawn77 is offline   Reply With Quote
Old 05-16-2015, 04:45 PM   #654
gwg
2 Rivet Member
 
gwg's Avatar
 
2015 30' Classic
Glen Mills , Pennsylvania
Join Date: May 2013
Posts: 67
Ours works well, have a few hours on it. My bet is faulty stat.
__________________
gwg is offline   Reply With Quote
Old 05-16-2015, 09:50 PM   #655
Rivet Master
 
2016 30' Classic
Erie , Colorado
Join Date: Oct 2013
Posts: 1,245
Images: 1
Different furnace issue showed up yesterday. Fan starts up normally. Burner fires and runs for about 10 seconds then shuts off. Wait 15 seconds and it fires again only to turn off again. Keeps doing this cycle.

Think it was working fine on my trip two weeks ago back from Colonial.

Did a web and forum search. Checked all connections. No led light flashing on the board.

Saw one post that mentioned covering the exhaust port with you hand. Tried that with a rag and low and behold fired up and kept running. Covered half the exhaust port and it kep running. Remove the rag and flame out. Almost like it is getting to much air.

But even with the exhaust covering method once it runs a few minutes it goes into a flame off mode, probably to cool down, and then it is back to short burns with 15 seconds between cycles.

Thoughts or suggestions? Will call Atwood on Monday.
__________________
Gary
2015 Classic
2015 GMC Sierra 2500HD Duramax
ProPride
NVPN
ghaynes755 is offline   Reply With Quote
Old 05-17-2015, 12:07 AM   #656
Rivet Master
 
switz's Avatar

 
2014 31' Classic
2015 23' International
2013 25' FB International
Apache Junction , Arizona
Join Date: Sep 2012
Posts: 4,799
Images: 8
From our prior experience with our first Airstream and reading the forums, i knew in the new second trailer we needed to raise the thermostat off the refrigerator wall which is uninsulated and can either be colder in that space with outside air than the air inside the trailer or hotter in the summer.

So we filled the hole for the wiring with soft putty for an air seal and placed the thermostat on a separate additional wood surface with rubber under the thermostat. That resulted in more accurate operation for both heating and cooling.
__________________
WBCCI Life Member 5123, AIR 70341, 4CU, WD9EMC

TV - 2012 Dodge 2500 4x4 Cummins HO, automatic, Centramatics, Kelderman level ride airbag suspension, bed shell

2014 31' Classic model 30 twin beds, 50 amp service, 900 watt solar system, Centramatics, Dill TPMS, disc brakes, 16" tires & wheels
switz is offline   Reply With Quote
Old 05-17-2015, 08:14 PM   #657
Rivet Master
 
Remax gal's Avatar
 
2014 27' FB Eddie Bauer
Lake Placid , Florida
Join Date: Aug 2013
Posts: 641
Have you tried just running the heat pump?


Laura & Tom
__________________
Let the good times roll!! Laura
Remax gal is offline   Reply With Quote
Old 05-18-2015, 12:12 PM   #658
Rivet Master
 
2016 30' Classic
Erie , Colorado
Join Date: Oct 2013
Posts: 1,245
Images: 1
Heat pumps worked fine but the temps were dropping below 40 degrees. So that worked out for me at the AS rally with the Denco unit this past weekend. But I do a lot of boon docking so the furnace is the go to device. Have calls into Jackson Center and my dealer. Device is really pretty simple. It's just getting answers and then parts since the last time I asked the local dealer for a service appointment it was 3-4 months. Likely Camping World would also be an option since it just an Atwood Furnace.

Tried to find a manual with a legible parts list but nothing on the web
__________________

__________________
Gary
2015 Classic
2015 GMC Sierra 2500HD Duramax
ProPride
NVPN
ghaynes755 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
NorCal : 2015 Jackson Rancheria Fally Rally October 9-11, 2015 Coastalview Forum Rallies & Meet Ups 48 05-30-2017 02:49 PM
Question for owners of late model Ram 2500 6.7 Cummins Diesel Owners SteveH Tow Vehicles 110 03-09-2015 01:43 AM
2015 MOUNTAIN AIR Rally April 17-20 2015 shermantic Forum Rallies & Meet Ups 2 01-13-2015 08:43 AM
2015 Classic news Firedog1 Airstream Trailer Forums 7 01-06-2014 06:37 PM


Virginia Campgrounds

Reviews provided by




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.