Satellite Connection Inside 2015 30

[Mldun]

I picked up my new 2015 Flying Cloud 30 yesterday and I can't find the satellite connection inside the unit. I am wondering if they forgot to finish it? Thanks!

[rbs]

same issue in our 2015, called the factory and was sent an email with instructions. You will need to install a HDMI switcher/splitter to get it satellite ready.

[paiceman]

The connection is under the blue ray player "box". You will need to take the blue ray player out, take the box out, three screws, two on lower left and one upper right. There you will find an array of wires and a small box, it's a slitter box. Then as rbs says you need to get an HDMI switch box. Connections are fairly straight forward and box is switch box is labeled input and output. In would be the "free" coax which is the Sat connection and out would be a new HDMI cable you buy. I also on several AS hooked up the Blue Ray into the switch box so I can switch back and forth. The TVs thru the antenna operate off a different wiring schematic.

Hope this gets you on track, I am doing this without looking at what I've done three times now and I am pretty sure I've got it all in.

[Mldun]

Thanks rbs and paiceman!

[PSU1981]

paiceman -- The HDMI cable that you buy that goes in the out of the switch box -- do you have to run that to the TV? Like 10' of HDMI cable exposed?

Glenn & Sallly
Charley - British Golden Retriever
2015 27FB Flying Cloud
2015 5.7L V8 Tundra