Thread Tools Search this Thread Display Modes
Old 04-10-2019, 10:31 AM   #1
2 Rivet Member
2018 22' Sport
Ludlow Falls , Ohio
Join Date: Jun 2018
Posts: 21
Angry 2018 AS Sport Bed

Is it just me or does others get frustrated trying to make a bed in a AS Sport 22'. If someone has this figured out, please share. The sheets I have are nice and fitted but getting them on is really a pain.

whbrown is offline   Reply With Quote
Old 04-10-2019, 03:19 PM   #2
Rivet Master

2007 22' International CCD
Corona , California
Join Date: Jul 2013
Posts: 6,546
Itís a pain with no cure. I use straps to keep the sheets in place so I donít have to make and remake the bed all the time.

Rich, KE4GNK/AE, Overkill Engineering Dept.
'The Silver HamShack' ('07 International 22FB CCD 75th Anniversary)
Multiple Yaesu Ham Radios inside and many antennae sprouting from roof, ProPride hitch, Prodigy P2 controller.
2012 shortbed CrewMax 4x4 Toyota Tacoma TV with more antennae on it.
rmkrum is offline   Reply With Quote
Old 04-10-2019, 03:32 PM   #3
2 Rivet Member
dlkershaw's Avatar
2016 22' Sport
Swedesboro , New Jersey
Join Date: Dec 2015
Posts: 76
It can be done

First: I am a 67 years old: Changing the sheets is a cross between a wrestling match and a gymnastics event.... I have tried several methods... this works best...Raise and lock the blinds on both sides of the sleeping area.... lift the left back corner of the mattress and turn the entire mattress, slide the mattress into the isle in front of the sink,. With the mattress on its side install the fitted bottom sheet... reinstall the mattress, put on the top sheet and any blankets.... the first time is the worst but after a few attempts it gets easier.... good luck...

dlkershaw is offline   Reply With Quote
Old 05-03-2019, 10:38 AM   #4
4 Rivet Member
la nomade's Avatar
2018 22' Sport
Currently Looking...
stanfordville , New York
Join Date: Sep 2011
Posts: 266
Images: 7
yes indeed it is a ordeal....i kneel on the bed and somehow fit the top and the best i can,then i lift the bed expose the storage bins and reach out and pull the sheet to slide the elastic part towards the front corners....and tuck it under the mattress ...acrobatics!!!!other solution when traveling i unfold my RVSUPERBAG made for rv and boating bedding...lined with sheets and comes in single double etc...very nicely made in USA check it out ,its
1800 377 0707....sweet dreams MV
la nomade is offline   Reply With Quote
Old 05-03-2019, 11:18 AM   #5
Rivet Master
2002 19' Bambi
Lafayette , California
Join Date: May 2005
Posts: 877
Our 19' is a bit different, but does have the bed up against 2 walls. Many years ago, I found the best way to get a fitted sheet on the mattress was to slip it slightly over each corner and then ... yes, I mean it ... get under the mattress (on my knees and with the mattress on my back) and pull the sheet into place from underneath.

Tim A. is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Are my Tongue weight and Cat Scale Conclusions Correct for 2018 Globetrotter / 2018 G GOUSC Towing, Tow Vehicles & Hitches 15 10-29-2018 06:00 PM
Please help: 2018 Globetrotter => 2018 F-150 Lariat SuperCrew Confirmation ddrg Tow Vehicles 167 03-11-2018 06:16 AM
2018 Jeep Eco-Diesel VS 2018 Expedition? Barretta2 Tow Vehicles 57 03-10-2018 03:39 PM

Featured Campgrounds

Reviews provided by


This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 04:39 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.