Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-07-2008, 08:23 AM   #1
2 Rivet Member
 
1989 34' Limited
toronto , ontario
Join Date: Aug 2007
Posts: 34
frame for entrance door cracked

on the 1989 34' limited, the door frame is cracked at the weld joint located at the bottom left hand corner, the joint has now separated (1/8") what repair would you suggest? The dealer put in 1/16" pop rivets to hold the joint together (what a waistof time)
letsgo123 is offline   Reply With Quote
Old 08-07-2008, 10:20 AM   #2
Rivet Master
Airstream Dealer
 
Inland RV Center, In's Avatar
 
Corona , California
Join Date: Feb 2002
Posts: 16,497
Images: 1
Quote:
Originally Posted by letsgo123 View Post
on the 1989 34' limited, the door frame is cracked at the weld joint located at the bottom left hand corner, the joint has now separated (1/8") what repair would you suggest? The dealer put in 1/16" pop rivets to hold the joint together (what a waistof time)
The dealer wasted his time and your money.

The sole reason the door jambs crack at the welded corners, is lack of proper running gear balance.

The door area is weaker than the rest of the trailer. Accordingly, it cannot handle very much punishment.

The proper repair is to remove the door jamb and have it welded back together,

The poor boy repair is to jack the trailer up from the frame opposite the crack, or from the outrigger. That will close the gap in the crack.

Then "V" groove the crack and have it welded together again.

Andy
__________________
Andy Rogozinski
Inland RV Center
Corona, CA
Inland RV Center, In is offline   Reply With Quote
Old 08-07-2008, 12:17 PM   #3
Rivet Master
 
purman's Avatar
 
1968 28' Ambassador
Cedaredge , Colorado
Join Date: Jul 2008
Posts: 2,542
I have the same problem but on the other side. I you weld it on frame you may catch the insulation and the fiberglass inside wall on fire, as aluminum gets very hot... You either take the door frame out or the wall apart. Mine had epoxy or JB weld on it neither work for very long... Till I can get it apart I am cutting a peace of 3/16 thick strip of metal at a 45 to screw to the side and bottom to hold it together...
purman is offline   Reply With Quote
Old 08-07-2008, 12:53 PM   #4
Rivet Master
Airstream Dealer
 
Inland RV Center, In's Avatar
 
Corona , California
Join Date: Feb 2002
Posts: 16,497
Images: 1
Quote:
Originally Posted by purman View Post
I have the same problem but on the other side. I you weld it on frame you may catch the insulation and the fiberglass inside wall on fire, as aluminum gets very hot... You either take the door frame out or the wall apart. Mine had epoxy or JB weld on it neither work for very long... Till I can get it apart I am cutting a peace of 3/16 thick strip of metal at a 45 to screw to the side and bottom to hold it together...
Fiberglass can melt, but it doesn't burn.

Andy
__________________
Andy Rogozinski
Inland RV Center
Corona, CA
Inland RV Center, In is offline   Reply With Quote
Old 08-07-2008, 12:59 PM   #5
Rivet Master
 
mustang's Avatar
 
1999 27' Safari
Kent , Ohio
Join Date: May 2006
Posts: 806
Metal fatigue is from wear if you have no unusual tire wear then your running gear is fine. I would look into a cool weld, Mig might be still to hot. They sell a metal rod made of a rerrouse metal that works but Ideally you need it off the trailer because metal against metal the heat will dissipate. I am intrested in what will work for you
mustang is offline   Reply With Quote
Old 08-07-2008, 01:06 PM   #6
Rivet Master
Airstream Dealer
 
Inland RV Center, In's Avatar
 
Corona , California
Join Date: Feb 2002
Posts: 16,497
Images: 1
Quote:
Originally Posted by mustang View Post
Metal fatigue is from wear if you have no unusual tire wear then your running gear is fine. I would look into a cool weld, Mig might be still to hot. They sell a metal rod made of a rerrouse metal that works but Ideally you need it off the trailer because metal against metal the heat will dissipate. I am intrested in what will work for you
An Airstream trailer that never moves, has yet to have a cracked door frame, since 1965.

The # 1 cause, without a doubt, since 1965 to present Airstream trailers, in lack of "PROPER" running gear balance.

Andy
__________________
Andy Rogozinski
Inland RV Center
Corona, CA
Inland RV Center, In is offline   Reply With Quote
Old 08-07-2008, 01:11 PM   #7
Rivet Master
 
purman's Avatar
 
1968 28' Ambassador
Cedaredge , Colorado
Join Date: Jul 2008
Posts: 2,542
Mine looks like it hit something. The outside skin was replaced just before the door frame on bottom..

Will the pink fiberglass catch fire???

Yeah I got my neighbor on it too. He is a retired machinist... So I'm hoping he can help...
purman is offline   Reply With Quote
Old 08-07-2008, 01:23 PM   #8
Rivet Master
Airstream Dealer
 
Inland RV Center, In's Avatar
 
Corona , California
Join Date: Feb 2002
Posts: 16,497
Images: 1
Quote:
Originally Posted by purman View Post
Mine looks like it hit something. The outside skin was replaced just before the door frame on bottom..

Will the pink fiberglass catch fire???

Yeah I got my neighbor on it too. He is a retired machinist... So I'm hoping he can help...
No.

Fiberglass, is fibres of glass.

It can melt, but it cannot catch fire.

Andy
__________________
Andy Rogozinski
Inland RV Center
Corona, CA
Inland RV Center, In is offline   Reply With Quote
Old 08-07-2008, 01:40 PM   #9
Rivet Master
 
TomW's Avatar
 
1967 26' Overlander
Huntsville , Alabama
Join Date: Dec 2003
Posts: 3,018
Images: 4
Ruh Roh

Quote:
Originally Posted by mustang View Post
... They sell a metal rod made of a rerrouse metal that ...
Never heard of it. The Internet was stymied too:

Quote:
Originally Posted by Google
Did you mean: ferrous metal

No standard web pages containing all your search terms were found.

Your search - rerrouse metal - did not match any documents.

Suggestions:

Make sure all words are spelled correctly.
Try different keywords.
Try more general keywords.
Try fewer keywords.
Could you please share a different spelling, different key words, more keywords, or fewer keywords?

Tom
TomW is offline   Reply With Quote
Old 08-07-2008, 01:43 PM   #10
Rivet Master
 
HowieE's Avatar
 
1991 34' Excella
Princeton , New Jersey
Join Date: Aug 2003
Posts: 7,070
Images: 12
Before you commit to a repair of the door frame I would remove the banana, metal band not just the blue insert, along that side of the trailer and check for any type of body separation. No matter what the cause was something had to move from it's original position to cause the 1/8 gap.

Sorry I don't have any before the repair pictures but if you enlarge the picture you can see from the jagged edge on the exterior skin how the rivets just ripped out of the skin. That is a new piece inserted to extend the skin down to the original connection point on the C channel
Attached Thumbnails
Click image for larger version

Name:	pins and needles.JPG
Views:	144
Size:	22.9 KB
ID:	65248  
__________________
WBCCI 12156 AIR 3144 WACHUNG TAC NJ6
2004 Excursion 4x4
1991 34 ft. Excella +220,000 miles, new laminated flooring, new upholstery, new 3200 lbs axles

HowieE is offline   Reply With Quote
Old 08-07-2008, 01:50 PM   #11
Rivet Master
 
purman's Avatar
 
1968 28' Ambassador
Cedaredge , Colorado
Join Date: Jul 2008
Posts: 2,542
My neighbor Ted thinks we might be able to keep it cool by spraying water on the inside wall and soaking the carpet before we weld. Gonna try it on a test piece this weekend before we give a go on the trailer..

I'll let you know how it works..
purman is offline   Reply With Quote
Old 08-07-2008, 01:59 PM   #12
Rivet Master
 
TomW's Avatar
 
1967 26' Overlander
Huntsville , Alabama
Join Date: Dec 2003
Posts: 3,018
Images: 4
I'm with Luke

Quote:
Originally Posted by purman View Post
My neighbor Ted thinks we might be able to keep it cool by spraying water on the inside wall and soaking the carpet before we weld. Gonna try it on a test piece this weekend before we give a go on the trailer...
Quote:
Originally Posted by Luke Skywalker in Star Wars IV - A New Hope
May the force be with you.

Tom
TomW is offline   Reply With Quote
Old 08-07-2008, 03:22 PM   #13
Rivet Master
 
richinny's Avatar
 
2011 34' Classic
Westchester Cty.NY , / Miami FL
Join Date: Jul 2007
Posts: 3,122
since improper jacking can bind the door, i'd consider this as another possibility of the crack.
__________________
Ricky
2012 F150 Super Crew 5-1/2' bed Ecoboost 4x4 3.73 elec. lock diff. Propride hitch
give life. kidney & pancreas transplant 9/9/06
Ingrid-my unofficial '"World's Oldest Streamer" 1909-2008 R.I.P.
richinny is offline   Reply With Quote
Old 08-07-2008, 06:45 PM   #14
2 Rivet Member
 
1989 34' Limited
toronto , ontario
Join Date: Aug 2007
Posts: 34
steel wool, with oxygen and ignition (flame) will burn (science lab. 101), Scorch fiberglass and add fast moving air and poooofff , done that, I almost set a 30 room school on fire, sooooo that is why I hesitate to weld on the trailer. I didnt want to remove the door frame, (looking for a quick fix , Like a magic bracket of some kind) . If there are other suggestions they would be most welcome.

PS: I comment on the possibility of fire only to be on the side of caution.

thanks
letsgo123 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Entrance Door cooperhawk Airstream Motorhome Forums 4 08-26-2007 04:59 PM
cracked Door frame Didgiman Doors & Locks 10 06-21-2007 12:00 PM
small door on entrance door lwebb Doors & Locks 4 05-30-2006 09:11 AM
Door frame cracked till Doors & Locks 11 02-14-2004 07:06 AM
Cracked door frame 77caravaner Doors & Locks 5 10-11-2002 06:43 AM


Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.



All times are GMT -6. The time now is 07:45 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.