What Did You Get For Your Trailer Today?

[silverwheels]

Originally Posted by Jim Flower

RV Rearview Camera installed and operating. I hooked it into the little light over the bed complete with its own switch and LED. Establishing the IPhone connection was a bit tricky for me but there was a kid around so it was done in jig time. JimAttachment 229271


Sent from my iPhone using Airstream Forums

Nice camera!! These kids know everything about electronics!! Can I borrow one so I can set up some things in my trailer too?!

[Dingo Girl]

Got a 4' x 2' piece of. 032 Alclad that will become a threshold cover, also going to cut some pieces to go at the end of each outrigger to prevent wear to the skin. (the VAP idea). The excess will find a use.

[Paddledipper]

A brand new floor!

[thumbelinadj]

Aluminum for my belly pan. Airparts in Kansas City order received -forty feet of 2024 for replacing panels on the Globetrotter.

[TCwheels]

Originally Posted by RoadCessna

My husband is often troubled by "butt freeze" when his lower back comes into contact with the metal wall on our FC20 with a front bed. Doesn't have to be very cold outside for that inner wall to be very chilly! I solved this by making an adult-size "crib bumper". First, I cut a seven-inch-wide strip of one-inch-thick foam rubber, seven feet long. This reaches from the head-end hamper to the foot hamper. I wrapped it with a layer of quilt batt---leftover from quilting projects---then made an envelope out of a seven-foot length of a cheap fleece blanket, sewing right sides together, turning, an inserting the foam core. Buying the blanket at Walmart was cheaper than buying the yard goods, and I have something left over to cover matching pillows.

I turned the open ends inside, pinned to fit the core, then whip-stitched the entire length by hand. It didn't take very long. Voila! A nice, snuggly, warm, backrest for the bed---and no more butt freeze!

Pictures please! We same trailer, same issue!


WBCCI #7246
AIR #91367

[TCwheels]

Out with the old GM tires on 15" rims, in with new Michelins on 16" Sendel T03s!



WBCCI #7246
AIR #91367

[Lothlorian]

I bought a brand new Suburban 3 burner stove top. I pick it up next week

[Ag&Au]

Originally Posted by TCwheels

Pictures please! We same trailer, same issue!


WBCCI #7246
AIR #91367

Let me get this straight.

You want pictures of her husband's butt freezing?

Ken

[ROBERTSUNRUS]

Originally Posted by Ag&Au

Let me get this straight.

You want pictures of her husband's butt freezing?

Ken

Hi, and some of the same people dislike Classics and Safari's that don't have that problem because of the mouse fur walls.

[ROBERTSUNRUS]

Originally Posted by ROBERTSUNRUS

Hi, and some of the same people dislike Classics and Safari's that don't have that problem because of the mouse fur walls.

Hi, no butt freeze in here.

[Drathaar]

I finished the install of my Airsafe class V hitch today. It's used in conjunction with an Equalizer 10k bars. The front of the truck is within 1/3 of an inch of perfect for the WD, so I'm not going to mess with it further. The added benefit is the truck tailgate now clears the Jack!

I'll recheck torques and the we are ready for a winter trip.

[TCwheels]

Originally Posted by Ag&Au

Let me get this straight.

You want pictures of her husband's butt freezing?

Ken

No butt pics please!


WBCCI #7246
AIR #91367

[Rocinante]

No butt freeze in our 27FB with the bed nicely positioned in the middle of the room. OTOH, we sometimes get arm freeze or hand freeze from touching the wall at our heads...so we could probably use the same buffer treatment there.

[Airlovr]

1:18 scale Airstream Bambi
Cause I'm still a kid.



Sent from my iPhone using Airstream Forums

[Twinke58]

This what I got for my trailer over the Christmas break

[Ag&Au]

Originally Posted by TouringDan

Chief

I don't think I have ever seen a 60 watt cfl bulb. Nice light though.

Dan

If it what I think it's, they are usually labeled as a 13 watt bulb which is equivalent in light output to a 60 watt incandescent bulb.

Ken

[Bettye]

Originally Posted by mefly2

Wwe installed ours in the vertical orientation ...
had to cut/grind off the screws to shorten, too.

http://www.airforums.com/forums/f48/...ml#post1504004


__________________

Used a Christmas gift card to pick up on of these paper towel holders yesterday. I've been looking for the right thing for a while now. Thanks for sharing.

[Bettye]

Originally Posted by 79nTOW

Just ordered the pajamas!! Ordered in time for the Can Opener.

Predeta

Wonder how many of us were wearing the same PJs at the Canopener. We should have had a fashion show!

[Bettye]

Originally Posted by switz

We are having a custom cabinet built on the left side of the dinette similar to those in the Classic trailers to store a couple of ZipDee chairs that will have matching fabric to our awnings. The cabinet front, side behind the dinette pillow, counter top and door handle will match the materials used by Airstream when the built our Serenity in June 2012.

We can get rid of a bulky odd shaped Airstream pillow that makes that side of the dinette an uncomfortable place to sit. The dinette sleeping space will not be negatively impacted. And we will some more hard flat space to put things on since the kitchen counter top space is limited.

We are also going to retrofit a Maxim skylight in lieu of the original one from Airstream. We are leaning towards Bronze, clear, clear for the three layers. We will still have the pull across Airstream skylight curtain.

Could you post a picture of your cabinet? We want to get rid of that weird cushion, too.

[Bettye]

Originally Posted by m.hony

A short piece of wire...
Attachment 215701
Attachment 215702
Attachment 215703


Sent from my iPhone using Airstream Forums

Bought an adapter from Skatiero at the Canopener last weekend. Love having the running lights on while we're camping!