I found a 36x48 sheet of lexan at Menard's today for $68. They had a fair amout of aluminum channel (angle and flat) I think I can make a frame out of. My hinge is about the only thing left or the original rock guard. I'm still tring to find a good (cheap) source for a pair of rubber hood tie downs for the bottom, any ideas? I am also trying to figure out how to make a pair of rods to hold the widow up?
Tom, please post some pictures as the project progresses. I am going to be doing the same project soon.
__________________
MICHAEL
Do you know what a learning experience is? A learning experience is one of those things that says "You know that thing that you just did? Don't do that."
2001 16' Bambi
2013 23' International
Piedmont Region
, North Carolina
Join Date: Aug 2006
Posts: 408
Rock Guard Hold Down Latches
Quote:
Originally Posted by project66
I'm still tring to find a good (cheap) source for a pair of rubber hood tie downs for the bottom, any ideas? I am also trying to figure out how to make a pair of rods to hold the widow up?
Good luck! We did this last month, and it was a quick and fun little project. Luckily, we did have hardware from the god-awful...thing.. the PO put on Ambassador. Just built a frame from some aluminum C-Channel.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.