Quote:
Originally Posted by ardenrj
I have an Eaz Lift WD hitch. Is it possible to add dual cam sway control to this hitch. If so any thoughts where to buy? Thanks for the help
|
As Kevin mentioned, if you have the round bars all the way, then it can't be converted.
If your bars taper off into flat ends, then it is possible. Andy at InlandRV in Corona has the information on where to get the saddles.
However, before attempting to do so, you might want to clean and carefully inspect the hitch head receptacles and the hitch side bar ends for wear and/ or scoring. A common problem with eaz-lift type wd hitches is scoring and/ or ovaling of the receptacle holes due to lack of lubrication, and due to dirt accumulating on the curved bar end. Sometimes this can lead to uneven bar tension between the two sides. ( As it is on my old hitch)
So, before investing in updating an eaz lift to dual cams, make sure it's in perfect working order, or you'll waste your money.