Our 07 19ft Bambi should be arriving from the factory in a bit, and I am trying to calculate the correct hitch shank for an equalizer hitch.
The shank selection tool asks for the number of inches from the parking surface to the inside top of the trailer coupler, when the trailer is parked level.
Can anyone measure this for me on their Bambi?
Also what kind of tongue weight can I expect with this unit? Assuming 2 LP tanks full, the 2 batteries and spare tire.
These specs are available on www.airstream.com. Go to PRODUCTS/BAMBI/SPECIFICATIONS; this will provide hith ball height,tongue weight, and all other measurements. Tongue weight can vary somewhat based upon how you load.
__________________ SuEllyn & Brian McCabe WBCCI #3628 -- AIR #14872 -- TAC #FL-7 2015 FC 25' FB (Lucy) with ProPride 2020 Silverado 2500 (Vivian) 2023 Rivian R1T (Opal)
As far as coupler height, off the top of my head it was approximately 18.5"....but I'll have to check that number foresure tonight. It's very close to that.
Tongue weight will be close to 600lbs as well depending on options. The tongue weight specs do not include full LP tanks, just the battery. So 510 spec plus propane puts you close to 600lbs.
brad.
__________________
Team Ironcops for Cancer 2006 Raced! Ironman Canada in support of the Canadian Cancer Society www.ironcopsforcancer.com
We raised over 1.3 Million dollars for Cancer Reseach this year. Great job team!!
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.