|
02-14-2009, 09:18 PM
|
#1
|
2 Rivet Member
1973 21' Globetrotter
Middletown
, Rhode Island
Join Date: Nov 2006
Posts: 45
|
Axle Shock Mounts
Are factory installed shock mounts available for Dexter or Axis replacement axles? Thanks
|
|
|
02-15-2009, 12:47 AM
|
#2
|
Rivet Master
1975 Argosy 26
1963 24' Tradewind
Seattle
, Washington
Join Date: Aug 2002
Posts: 2,341
|
Yes... you would have to call Colin at GSM vehicles regarding the Axis axles... Dexter, you would have to order them on... for the #10 axle... (10" brakes)
pt #033-088-01 for the LH,
PT # 033-088-02 for the RH.
For the #11 axle.... (12" brakes)
LH 033-086-01
RH 033-086-02
Marc
|
|
|
02-15-2009, 01:40 AM
|
#3
|
Mini Rivet
1975 25' Tradewind
Holland
, Michigan
Join Date: Sep 2008
Posts: 273
|
Axis can provide shock mounts for Airstream's and you can order them directly from Axis Products.
I was quoted $600.00 for a pair with 12" brakes, actually I had mine rebuilt but after buying new brakes and drums I could have bought new ones for the same money.
|
|
|
02-15-2009, 03:34 AM
|
#4
|
Restorations done right
Commercial Member
1962 26' Overlander
1961 26' Overlander
Vintage Kin Owner
Currently Looking...
Baltimore
, Maryland
Join Date: Aug 2007
Posts: 5,545
|
sure hope another axle pissing match does not start....
If you order Axis through Colin, the brackets come already attached. Vertical or horizontal will be one of the questions he will ask. The info you need to give him is hub face to hub face distance. Frame rail to frame rail distance. And weather the axle bracket is longer forward or to the rear of the axle tube. All this information is about as easy to get as it is to write down a serial number. Okay it takes a little effort, but for what you save, it is worth the extra three minutes. I placed my order and three weeks to the day, the axles were here.
As far as $600 a pair for 12"... well that is a super price and could never have included shipping. Not calling anyone a liar or looking for debate, but that price is a little too good to be true. I paid $1160 for a pair of 10" 3200# axles shipped from Indiana to Baltimore. I went with the 10" brakes because they are actually for 3600# axles and felt that they were already more than enough stopping power. I could have gotten 12" brakes for an additional $168/ axle. I felt it was over kill. Hydraulic actuated was also available . The nice powder coating instead of paint is standard.
Yes you will need to drill a few holes. They are not a direct change out, but once again either are the Henchens or the Dexters, the savings more than makes up for the inconvenience.
|
|
|
02-15-2009, 04:31 AM
|
#5
|
Rivet Master
1973 27' Overlander
Loganville
, Georgia
Join Date: Nov 2007
Posts: 1,741
|
My axels from Dexter have been ordered and they will have shock mounts on them. The shock mounts on the axel will be 1" closer to the frame shock mounts. I don't think that should be a problem. I went with the #10 also.
I guess I will have to make the channel wider on the frame to make them fit. I hope it is not going to be to difficult.
Lothlorian
__________________
Brian & Adrienne
|
|
|
02-15-2009, 08:56 AM
|
#6
|
Rivet Master
1971 21' Globetrotter
Currently Looking...
Currently Looking...
Currently Looking...
Arvada
, Colorado
Join Date: May 2006
Posts: 3,530
|
I just cut them off the old axle and welded them on the dexters
|
|
|
02-15-2009, 10:08 AM
|
#7
|
Mini Rivet
1975 25' Tradewind
Holland
, Michigan
Join Date: Sep 2008
Posts: 273
|
The information I was given from Axis is if you give them the shock mount location and mounting hole location and they will weld the shock mount on and have the mounting holes in the correct location.
At least for my year axles they already had the the engineering data, I've personally seen it.
May add to the cost though, I don't know, the $600.00 quote I received was were some numbers they through at me while we were shooting the breeze waiting for my axles to get finished.
You can read about my axle rebuild here: http://www.airforums.com/forums/f437...ild-46697.html
|
|
|
02-16-2009, 12:26 PM
|
#8
|
2 Rivet Member
1973 21' Globetrotter
Middletown
, Rhode Island
Join Date: Nov 2006
Posts: 45
|
Would anyone know if the factory installed Dexter shock mounts work with a 70s trailer without modification? These are mounts Dexter used in late model Airstreams - does the mount work in older trailers? Thanks
|
|
|
02-16-2009, 03:26 PM
|
#9
|
More than one rivet loose
Currently Looking...
Los Alamos
, New Mexico
Join Date: Feb 2006
Posts: 3,756
|
Quote:
Originally Posted by Cos
Are factory installed shock mounts available for Dexter or Axis replacement axles? Thanks
|
Not to hijack the thread but how do you when it is time to replace them? Miles? Years?
__________________
Michelle TAC MT-0
Sarah, Snowball
Looking for a 1962 Flying Cloud
|
|
|
03-04-2009, 01:18 PM
|
#10
|
4 Rivet Member
1976 24' Argosy 24
1999 30' Excella 1000
White Haven
, Pennsylvania
Join Date: Jul 2006
Posts: 402
|
Quote:
Originally Posted by Cos
Would anyone know if the factory installed Dexter shock mounts work with a 70s trailer without modification? These are mounts Dexter used in late model Airstreams - does the mount work in older trailers? Thanks
|
I believe Dexter will only add shock mounts to the 22.5 degree starting angle. The mounts worked in our 76 Argosy 24 with no modifications.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|