The Right Gasket for Door in Door

[mhutchinson]

I've been searching the forum but haven't found what gasket/seal to use on my '63 globetrotter door in a door. The current gaskets look sort of like this window seal but flatter.



They are about 5/8" wide and about 3/16" thick when compressed.

Our globetrotter also has a very similar or same gasket on the compartment door.

Any help finding this gasket or a reasonable replacement is greatly appreciated.

Thanks,
Matt

[Inland RV Center, In]

Originally Posted by mhutchinson

I've been searching the forum but haven't found what gasket/seal to use on my '63 globetrotter door in a door. The current gaskets look sort of like this window seal but flatter.



They are about 5/8" wide and about 3/16" thick when compressed.

Our globetrotter also has a very similar or same gasket on the compartment door.

Any help finding this gasket or a reasonable replacement is greatly appreciated.

Thanks,
Matt

Matt.

There are two different gaskets for the door insert door.

If it's flush with the exterior door then it's part # 45295 or better yet, 45370.

If it sticks out about 1/2 inch from the main door, then 45213 is the correct gasket.

Andy

[mhutchinson]

That's great. Thanks Andy. I'll be ordering some of those and door main gaskets too.

[mhutchinson]

Just for reference, Andy PM'd me with the following correction:

Sorry, I boo boed.

The 45213 should be 45313.

My apology.

Regards.

Andy
__________________
Andy Rogozinski
Inland RV Center
Corona, CA