How the Lovin' Oven got fixed...
Finally, got it done.
Cleaned off the old sealant, trimmed a new sewer vent cap base to fit around the refrigerator vent, extended the vent pipe with a trimmed down ABS pipe connector and a short piece of pipe, applied Sik Flex 221 to the base, and installed it with the old screws supplemented with weatherseal washers.
No rubber gasket required!
Except for the jury-rigged extension of the pipe, this is how the vent cap should be installed.
__________________
The Lovin' Oven is an 04 28' International CCD.
It follows where the F150 Supercrew leads.
"The only time to say "No" is when they ask if you've had enough"
|