Quote:
Originally Posted by Nomadtek
I'm looking for info concerning gaskets. Do the '68 roof vents have them? If so, what are the tools/rivets I will need to pull them and re-install? Also, where would I find these gaskets? Any suggestions on where to purchase rivets/gun?
To clarify, I am talking about the cabin ventilation hatches. Not the plumbing/refridge. vents.
Any help or advice on "how to" would be greatly appreciated.
Thanks
Buster (nomadtek)
|
No tools required to replace the vent cover gaskets.
After you remove the old material, simply peel of the paper from the gaskets sticky side, and apply it.
You will need 5 feet for each solardome and 7 feet for the astrodome.
Just your hands and eyes, is all you need, for tools.
The correct gasket is open celled, and is not expensive.
Andy