I plan to caulk around the outside frame edge of the black Hehr windows on my 02 Safari. I plan to use black 221 Silkaflex.
In the past I have noticed that some SOB's do not apply caulk completely across the bottom edge of the frame. I assume that this is to allow drainage of any condensation in the frame. Should I seal the window frames all the way around or leave a un-caulked strip along the bottom edge of the frame.
Just bumping this back up to see if anyone knows "Should I seal the window frames all the way around or leave a un-caulked strip along the bottom edge of the frame".
Thanks in advance for any insights or experience with this.
Just bumping this back up to see if anyone knows "Should I seal the window frames all the way around or leave a un-caulked strip along the bottom edge of the frame".
Thanks in advance for any insights or experience with this.
Bud
That depends on any possible present leaks.
If none from the windows, then seal the 2 sides and the top.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.