Ventline Bathroom Fan

[Aerowood]

How far does the Ventline bathroom fan protrude from the exterior skin when fully opened?

[Bluto]

Mine measures 2.5 inches closed and 3 inches when opened.

[Aerowood]

Thanks, I was afraid of that. I'm looking for something that sets fairly flush and only protrudes about an inch when open. I guess I'll just have to come up with something different.

[Protagonist]

I've recommended this a couple of times before.

Nicro 3" Stainless Steel Minivent 1000 (made by Marineco).
3" Stainless Steel Minivent 1000 | Marinco

Low profile, and it's solar-powered, so no need to run wires for it. Protrudes less than 2 inches.

[Hittenstiehl]

Protag & Aerowood
Was intrigued by the vent and BOOKMARKED it (from my phone yeah got it figured out ((previous post)) finally). Where and in what application would you use this particular vent.
Thanks Hittenstiehl

[Protagonist]

Originally Posted by Hittenstiehl

Protag & Aerowood
Was intrigued by the vent and BOOKMARKED it (from my phone yeah got it figured out ((previous post)) finally). Where and in what application would you use this particular vent.
Thanks Hittenstiehl

It would make an excellent shower or bathroom vent.

But you could install one anywhere you're willing to drill a 3¾" hole through your roof. Especially good for when your trailer is in storage; as long as you have sunlight you can vent your trailer without using your house batteries at all.

[Hittenstiehl]

Thank you that type of product would work very good for us as it will be in storage a lot, its very hot here, with lots of sunshine and we would like to preserve whatever new finishes will be going into the trailer.
Hittenstiehl

[Aerowood]

Originally Posted by Protagonist

I've recommended this a couple of times before.

Nicro 3" Stainless Steel Minivent 1000 (made by Marineco).
3" Stainless Steel Minivent 1000 | Marinco

Low profile, and it's solar-powered, so no need to run wires for it. Protrudes less than 2 inches.

Thanks for the link, the non solar may work. I am re-tasking the old stove vent outlet for the bathroom vent in the reconfiguration of my interior. There is little room under the old stove blister. I may just have to use a 12VDC muffin fan.