Fantastic fan optimizing
I have 2 wireless fantastic fans. The remotes seemed less than effective. After replacing the batteries, I came across these 2 procedures, the second being unpublished.
ReProgramming:
1 remove fuse from main fan, and battery from remote. 90 seconds min.
2 reinstall fuse and batteries.
3press both up and down buttons until all speed LEDs blink once.
4 test for proper operation.
Changing remote RF power output
1 Remove batteries from remote.
2 press and hold mode button.
3 using speed buttons increase or decrease output level.
4 LEDs will remain lit for 10 seconds then return to off.
5 test for improved operation.
Increasing the rf level made a big improvement. It is set by default to the lowest level from the factory.
|