'64 jalousie HELP!!!!!

[Frank's Trailer Works]

Okay, asking for help, and even have a photo...

I need help finding a pair of these carries. They are off a 1964 Sovereign

[goransons]

Happy Thanksgiving Frank, can you give me a rivet to rivet measurement on those rusty steel rivets and the width between the tab retainers for the glass?

[Frank's Trailer Works]

Attachment 115929
That is 4 1/8" from front to back.

1 1/4" between the rivet holes.

1 3/4" from the top hole to the rear of the carrier.

apparently a very important measurement is from the front inside edge to the lower hole which is 2 1/2"

I know they are out there. I need a right and two lefts. One pair will get me by, but would like to replace the other if possible.

[BradS]

I am very interested in these parts as well. I have a pair of jalousie windows from a 1964 Airstream. I am looking for 1 set, right/left

Any info would be very appreciated

[goransons]

Frank I sent you an email from my phone with a picture, think there are two there that would work, not three though. Will keep my eye out for more, they are the same as 63 BTW. Brad if I come across more I'll let you know.

[3Ms75Argosy]

Gee Frank, I was going to suggest VTS, but then I noted that they said it was NLA.. then checked online with Hehr, and it seems that all the supply places are selling a 2 1/8" one. Too bad it has so many cut outs and bends, it looks like it might be easy to make without those spring bends.

I'm stumped too!
Marc

[Petethefeet]

Hi, I purchased a modest number of pairs of brackets for jalousie windows some time ago from VTS. I have not ended up using them and would have to check their dimensions, but you are welcome to acquire them if they are any use to you......oh, and I should qualify that by saying have to find where they are hiding in my workshop first!
Pete

[truckasaurus]

Hey Frank, with the correct material these were actually pretty straightforward to make for my '61. If you get stuck drop me a note.

William

[Frank's Trailer Works]

I have been told a pair are on the way...

[airstream4]

I found some that look close!
Stamped aluminum construction; fits 4 inch glass; used on International windows. - Door and Window Parts & Hardware
These were listed as 4" drgs don't show height
Paul