1970 Ambassador curved side windows.

[Uppie89]

I need the curved side glass for a 1970 ambassador. It's the curb side both pieces and a small oval. And 1on the other side. Curved ones on the front corners are good!


Thanks for any help.

[montanablue]

Measure them and post. I might be able to help.
Rick

[Uppie89]

I will do it tomorrow. Thank you

[Uppie89]

Originally Posted by montanablue

Measure them and post. I might be able to help.
Rick

Sorry took so long it was a busy weekend. I have the measurements but im pretty sure its not the glass size. It was raining buckets but this is what I have let me know if this helps if not Ill get better ones tonight.

2- windows these are the back side windows both sides 41" wide x 22-1/4" tall. Glass will be smaller I just measured the frame thats in the camper opening.

1 window street side above kitchen sink. 30-3/8" wide 21-1/4" tall.

Oval window next to front door 18-1/4" wide x 7-3/4" tall.

Also looking for stock roof top vent hardware. I also need to replace the big rooftop opening vent this is a rectangular plastic piece. The other two are aluminum that lower down. I like to keep those.

thanks for any help.

[Inland RV Center, In]

Originally Posted by Uppie89

Sorry took so long it was a busy weekend. I have the measurements but im pretty sure its not the glass size. It was raining buckets but this is what I have let me know if this helps if not Ill get better ones tonight.

2- windows these are the back side windows both sides 41" wide x 22-1/4" tall. Glass will be smaller I just measured the frame thats in the camper opening.

1 window street side above kitchen sink. 30-3/8" wide 21-1/4" tall.

Oval window next to front door 18-1/4" wide x 7-3/4" tall.

Also looking for stock roof top vent hardware. I also need to replace the big rooftop opening vent this is a rectangular plastic piece. The other two are aluminum that lower down. I like to keep those.

thanks for any help.

Your dimensions say that you need two large curved, and one medium curved windows.

You also need one small stack window.

You will also need some Olympic rivets and one tube of Vulkem sealer, in order to proper install the stack window.

You won't need any gaskets as that comes with the new windows.

Andy