door adjustment after blown open

[art]

when riviting the skin back on the inside of a 2004 classic door can you use the same holes in the skin?

[DanielB]

Can you get the holes lined up? Are you that good?
Pop a rivet in there and see how tight it is. You might want to use slightly bigger rivets depending on the size/condition of the holes.

[HowieE]

If you start the riveting near the center of the sheet, using the original holes and work your way to each end of the sheet the hole might line up

[wasagachris]

The manual says to drill new holes otherwise you just lock in the old arch and you're back wher you started from with a bent door out of alignment.