Dead Bolt Key 1988 Excella 32"-0"
The P/O did not have a key to the deadbolt on my Airstream. I have taken it to several RV dealers and one said they wanted to drill through the frame to install a modified lock on the door with a dead bolt. I read in another post that Andy from Inland warns to never drill through a cast frame, so that's out. Another dealership could only shrug, and finally I went to the best lock smith in the area. They said I would be responsible for the rivets and skin and any damage upon removal to re-key the lock.
It is a Schlage dead bolt inset in the entry handle with a door bell. I'm not sure if the door frame trim that the skin seems to be under needs to be removed from around the entire door, and how the skin is peeled back or would you open the wall from the window side? The interior plate removed easily but I cannot feel any mechanics to remove the handle through the small opening to the interior of the wall. Can someone help advise so I may possibly think about doing this project myself or suggest another way to get a locking door that will not fly open when cruising down the highway!!!
Will Airstream provide a key if I provide proof of ownership and VIN?
|