|
|
03-14-2008, 09:02 AM
|
#161
|
3 Rivet Member
2011 30' Flying Cloud
North Falmouth
, Massachusetts
Join Date: Jan 2008
Posts: 144
|
K1MGH on Cape Cod. Dick
__________________
Dick and Claire Wiklund
North Falmouth, Massachusetts
"Judgement is based on experience and experience is based on poor judgement"
|
|
|
03-15-2008, 12:03 AM
|
#162
|
1 Rivet Member
1975 31' Excella 500
GRAY COURT
, South Carolina
Join Date: Feb 2007
Posts: 12
|
Repost and corrections
Antenna Mounts
DR JOE ASK ME TO POST THIS.
THE AES RADIO (MILWAUKEE) BIGFOOT ANTENNA BASE
YOU PUT IT DOWN ON THE GROUND AND PARK WITH YOUR TIRE SITTING ON IT. STICK THE MAST IN IT AND ZIP YOUR ANTENNA IS UP.
2ND CELL TOWER ANTENNA CLAMPS ON EBAY LIKE PICS. CLAMP ON JACKSTAND ABOVE FRAME AND THEN CLAMP IN YOUR MAST. CAPACITY 1/2" TO ABOUT 6" PIPE.
73
SPENCE
UPLOAD DID NOT WORK
P1010506.JPG:
P1010507.JPG:
.
I just noticed that download did not work. Go to my WEBSITE and see them there, then I don't have to fight
restriction on download here.
http://WWW.BACKROADS.NET/~K4KEP/HIDDEN/P1010506.JPG
and
http://WWW.BACKROADS.NET/~K4KEP/HIDDEN/P1010507.JPG
__________________
73
SPENCE
AIR # 19410
|
|
|
04-08-2008, 09:46 PM
|
#163
|
New Member
2008 16' Bambi
Reno
, Nevada
Join Date: Mar 2008
Posts: 2
|
RSobsey N7RHS Reno, Nevada
|
|
|
04-08-2008, 09:47 PM
|
#164
|
Miss Rivette
1965 17' Caravel
Hell
, Michigan
Join Date: Apr 2007
Posts: 1,644
|
Welcome Robert
|
|
|
04-08-2008, 10:53 PM
|
#165
|
Rivet Master
1951 21' Flying Cloud
1960 24' Tradewind
Folsom
, California
Join Date: Dec 2003
Posts: 727
|
KI6OPQ, Mark from Folsom, CA
__________________
Aluminumbskull with Led Balloon in Drag
***
Birch Plywood and Aluminum go together like
Peanut Butter and Chocolate
|
|
|
04-09-2008, 06:58 AM
|
#166
|
4 Rivet Member
1975 23' Safari
1978 31' Excella 500
Franklin
, Indiana
Join Date: Feb 2002
Posts: 481
|
Welcomes to Robert and Mark!
__________________
Dallas Peak, MD 'That 70's Guy!'
VAC Past President
WBCCI #8481
|
|
|
04-15-2008, 05:36 PM
|
#167
|
Rivet Master
2009 27' FB Flying Cloud
1982 31' International
1991 35' Airstream 350
Jay
, Oklahoma
Join Date: Oct 2006
Posts: 1,706
|
Coax Routing Help
Has anyone installed a RG-58 coax via the refer chimney?
How did you get it under the cover and threw the hardware cloth covering the opening?
Thanks!
__________________
Jeff & Cindy
'09 27FB Flying Cloud;'82 31 International
'91 350 LE MH; '21 Interstate 24GT
|
|
|
04-15-2008, 05:46 PM
|
#168
|
Rivet Master
1977 Argosy Minuet 6.0 Metre
Colorado Springs
, Colorado
Join Date: Dec 2003
Posts: 739
|
Quote:
Originally Posted by jdalrymple
Has anyone installed a RG-58 coax via the refer chimney?
How did you get it under the cover and threw the hardware cloth covering the opening?
Thanks!
|
Just drill out the rivets carefully, in the cover and remove it, the coax may pass through the hardware colth if not snip a wire or two then feed it. Reattach the cover with bulb type rivets.
__________________
Royce (K0RKK) 146.460 simplex
Web page https://spearfishcreek.net/
AIR# 3913
'77' Minuet 6 Metre, behind a 2005 stock Jeep Rubicon with Equa-L-Zer hitch.
|
|
|
04-15-2008, 06:06 PM
|
#169
|
Rivet Master
2004 30' Classic
Johnson City
, Texas
Join Date: Jun 2003
Posts: 591
|
Heat
What about heat and cable damage by using the frig chimney path?
73/gus kr4k
__________________
Gus - KR4K : Mary - K5MCL
2004 30ft. Classic
2017 Infiniti QX80 Limited
ProPride 3P/Prodigy P3
|
|
|
04-15-2008, 06:07 PM
|
#170
|
4 Rivet Member
1975 23' Safari
1978 31' Excella 500
Franklin
, Indiana
Join Date: Feb 2002
Posts: 481
|
I know one thing...I'd rather be running coax than doing what I did all day...which had nothing to do with ham radio, unfortunately!
__________________
Dallas Peak, MD 'That 70's Guy!'
VAC Past President
WBCCI #8481
|
|
|
04-15-2008, 06:11 PM
|
#171
|
4 Rivet Member
1975 23' Safari
1978 31' Excella 500
Franklin
, Indiana
Join Date: Feb 2002
Posts: 481
|
Gus, I've used the fridge for coax and never had a problem with heat. I don't think the fridge itself will get it that hot in there. My '75 came with a CB radio antenna attached and when I pulled the coax it looked fine except for the exposed to the elements outside where they had peeled back the braid.
__________________
Dallas Peak, MD 'That 70's Guy!'
VAC Past President
WBCCI #8481
|
|
|
04-15-2008, 11:33 PM
|
#172
|
1 Rivet Member
1975 31' Excella 500
GRAY COURT
, South Carolina
Join Date: Feb 2007
Posts: 12
|
Coax Routing
I routed the coax thru the screen below the access panel behind the fridge. Snake the coax thru a small hole in the creen then up behind the fridge then route to the radio.
__________________
73
SPENCE
AIR # 19410
|
|
|
04-16-2008, 09:53 PM
|
#173
|
2 Rivet Member
1987 23' Sovereign
Tucson
, Arizona
Join Date: Apr 2008
Posts: 49
|
Greetings
N7UTU here, name is Eric, Tucson, Az.
87' Sovereign, 23ft.
|
|
|
04-17-2008, 12:06 AM
|
#174
|
4 Rivet Member
2005 25' International CCD
1960 18' "Footer"
1959 26' Overlander
Riverside
, California
Join Date: Oct 2006
Posts: 339
|
Quote:
Originally Posted by DPeakMD
I know one thing...I'd rather be running coax than doing what I did all day...which had nothing to do with ham radio, unfortunately!
|
I am running my coax out through the floor under the front gaucho/sofa next to the spare tire holder where there is no belly pan, near where you spent your day based upon your picture, to a junction box with a female coax connector in a box on the front "A" frame. Then it can connect to my mobile antenna on the truck, a field dipole with mast mounted on the tongue or nearby or any exterior antenna I plan to use.
__________________
Don (KD6UVT) & Gail Williams
What do you want to be in life, a spectator or a participant?
SNU #157
FCU #004
|
|
|
05-03-2008, 10:34 PM
|
#175
|
4 Rivet Member
1975 23' Safari
1978 31' Excella 500
Franklin
, Indiana
Join Date: Feb 2002
Posts: 481
|
Don, that sounds like a great setup! Show us some pics of your work when it's all done.
__________________
Dallas Peak, MD 'That 70's Guy!'
VAC Past President
WBCCI #8481
|
|
|
05-05-2008, 09:15 AM
|
#176
|
Rivet Master
2005 25' International CCD
Fleetwood
, North Carolina
Join Date: Aug 2005
Posts: 687
|
Ham Radio Antenna Switch
Motoman & others,
Anyone happy with a good antenna selector switch? Our mobile is hard-mounted under the truck's backseat and a pain to disconnect and reconnect the 259 plugs for HF antennae. Would like an antenna switch under dash to pick, at least, from mobile antenna and an external wire or dipole. Found a bunch of remote control switches and other expensive or bulky solutions -- I'm thinking there must be a solid old-fashioned switch to choose from a pair and have a grounded position for down-mode?
73
N5RTG Jim
|
|
|
05-05-2008, 09:23 AM
|
#177
|
4 Rivet Member
1975 23' Safari
1978 31' Excella 500
Franklin
, Indiana
Join Date: Feb 2002
Posts: 481
|
I think Alpha-Delta makes the best. I've been pleased with how they hold up. Here's a link.
__________________
Dallas Peak, MD 'That 70's Guy!'
VAC Past President
WBCCI #8481
|
|
|
05-05-2008, 09:39 AM
|
#178
|
4 Rivet Member
1975 23' Safari
1978 31' Excella 500
Franklin
, Indiana
Join Date: Feb 2002
Posts: 481
|
Finally, a Ham Project Done!
Yaesu FT-8000R (2m/440)!
Coax is Diamond RG-316 pre-assembly with mini-UHF connector to make routing easier.
Mounted on the fridge vent with a Diamond mount and a Comet SBB-1 (all coil flexible short antenna).
A prior owner had a CB radio antenna in the same spot and had drilled the holes, so I just removed their old coax and ran new.
Model in the photo is my XYL (K9CDC).
__________________
Dallas Peak, MD 'That 70's Guy!'
VAC Past President
WBCCI #8481
|
|
|
05-05-2008, 01:28 PM
|
#179
|
Miss Rivette
1965 17' Caravel
Hell
, Michigan
Join Date: Apr 2007
Posts: 1,644
|
Nice, looks good, is the radio mounted down?
|
|
|
05-05-2008, 02:55 PM
|
#180
|
4 Rivet Member
1975 23' Safari
1978 31' Excella 500
Franklin
, Indiana
Join Date: Feb 2002
Posts: 481
|
Velcro!
It'll stay. This is an old radio I salvaged and didn't have a mount.
__________________
Dallas Peak, MD 'That 70's Guy!'
VAC Past President
WBCCI #8481
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|