Getting Behind Samsung DVD Player in 2015 FC 23D

[cactusjk]

I am trying to access the back of my Samsung DVD player to make some connections. Can someone explain/show pictures on how to do that? It sits above the table in one of the cabinets.

[NoResults]

I have the same setup in my trailer. You got me curious so I went out and it appears that there are two plastic tabs on the left of the box that the cd player is mounted in. I am sure if you pull these off you will find a screw under each that holds this cabinet in place.

Hope this helps. Dave

[Bgibbs]

Mine has 3 screws that hold the shelf in place. Yours should be similar. Player is held in place with Velcro.

[cactusjk]

Thanks for the quick replies. Hope just removing those 3 screws will all me to remove it.

[ranchometal]

I simply pulled on it and it's held by velcro and came right out. No screws needed!

[cactusjk]

Just to make sure just pull on the whole enclosure or just the DVD player?

Originally Posted by ranchometal

I simply pulled on it and it's held by velcro and came right out. No screws needed!

[Grateful2]

Pull out of hole brute strength not much!

[cactusjk]

Actually, on ours the Velcro is under the front of the DVD player so you need to lift the front up before pulling it out.