Braund Auto-Skyliner Antenna Control Panel
I used to have a Braund Auto-Skyliner antenna on top of the Excella. It was taken off by a tree or something by one of the previous owners.....I'm the 3rd. Anyway, the control panel has power still running to it and there are 8 of the 11 wires still sticking out from underneath the rotating plate. No lift or rotate motors are seen if they are still there. I have looked, googled, and even contacted the folks at Barker Manufacturing about locating a wiring diagram. I want to install a modern HDTV antenna on the Excella and still incorporate the "original" control panel. I do have power up on the roof and have already been able to figure out which wires "turn" and "return", but that is about it. Does anyone know which colored wire does, and goes to what? PLEASE HELP!!!
|