|
05-27-2015, 05:31 PM
|
#1
|
Rivet Master
2012 25' FB Eddie Bauer
Vintage Kin Owner
Virginia Beach
, Virginia
Join Date: Sep 2004
Posts: 7,801
|
Lights in Stove vent
LED's everywhere in the Eddie Bauer except in the stove vent/fan... and naturally they've burned out. Now how the heck do I change THESE light bulbs?
No jokes... I know it shouldn't be that hard but these resist my blandishments and curses.
Thanks, Paula
__________________
Today is a gift, that's why they call it the present.
|
|
|
05-27-2015, 06:15 PM
|
#2
|
Rivet Master
2012 27' Flying Cloud
W
, New England
Join Date: Oct 2012
Posts: 7,402
|
Paula - if you want to convert to LED entirely, there's a thread on that: http://www.airforums.com/forums/f447...ts-122477.html
I couldn't find any instructions or videos specific to Baraldi (assuming that's your model).
Sorry - good luck!
|
|
|
05-27-2015, 08:02 PM
|
#3
|
Rivet Master
2007 28' International CCD
Springfield
, Missouri
Join Date: Apr 2011
Posts: 1,423
|
Great place to buy them,I replaced mine last year.They have them in stock.I even put led's in my refrigerator.There is not a bulb on my trailer that is not a led.
LEDs 4, Recreational Vehicles
|
|
|
05-27-2015, 08:13 PM
|
#4
|
Rivet Master
2000 25' Safari
Davidson County
, NC Highlands County, FL
Join Date: Aug 2006
Posts: 4,493
|
__________________
Alan
2014 Silverado LTZ 1500 Crew Cab 5.3L maximum trailering package
|
|
|
05-27-2015, 10:10 PM
|
#5
|
Rivet Master
2012 25' FB Eddie Bauer
Vintage Kin Owner
Virginia Beach
, Virginia
Join Date: Sep 2004
Posts: 7,801
|
I have a 2012 with the new style "Baraldi" hood. It's got round flat light fixtures - and looks like xenon bulbs in them. I can't get them apart and I've messed with them. I have a bunch of unused LED lights (wrecked the Safari after I'd only installed a few), so all I need to know is how I take the fixture apart.
Paula
__________________
Today is a gift, that's why they call it the present.
|
|
|
05-28-2015, 12:25 AM
|
#6
|
Rivet Master
2015 30' Classic
Decatur
, Illinois
Join Date: Apr 2010
Posts: 681
|
LED light replacement
If you look at the ring you can see a small area to insert a small blade of screwdriver to pop the ring and lens off to get to the light. The lens was not secured to the trim ring so be careful not to drop it. The ring is held in place by clips that are attached to the ring and you might need to adjust them a little when you reinstall to insure a good fit. We replaced the halogen bulbs with LED's and also the refrig light with a LED
|
|
|
05-28-2015, 05:42 AM
|
#7
|
Retired.
Currently Looking...
.
, At Large
Join Date: Jun 2003
Posts: 21,276
|
Paula, check your text messages on your phone.
__________________
Meddle not in the affairs of dragons, for you are crunchy, and taste good with ketchup.
Terry
|
|
|
05-28-2015, 10:45 AM
|
#8
|
Rivet Master
2013 25' Flying Cloud
Wheaton
, Illinois
Join Date: Aug 2014
Posts: 646
|
The new style "Baraldi" hood uses a T3 12V 10W Halogen bulb.
I've found that the light receptacle in the hood is very low profile. When one of my bulbs went out, I purchased both a Halogen and LED T3 replacement at Home Depot. The LED replacement was too large to fit within the receptacle so I had to stay with the Halogen bulb.
Greg
|
|
|
05-28-2015, 12:04 PM
|
#9
|
Rivet Master
2015 30' Classic
Pleasanton
, California
Join Date: Jan 2015
Posts: 745
|
I also recently purchased the LED halogen replacements for the "Baraldi" hood as well from LED4RV. Dan@led4rv.com sent them out right away and they fit great!
__________________
Al, K6IV
2015 30' Classic, "Chez Nu"
2014 RAM 2500 w/Cummins Diesel
ProPride Hitch, 400 W Solar
|
|
|
05-28-2015, 12:49 PM
|
#10
|
Moderator
2015 25' FB Flying Cloud
2012 23' FB Flying Cloud
2005 25' Safari
Santa Rosa Beach
, Florida
Join Date: Jul 2006
Posts: 13,153
|
I have already had one of Lucy's range hood lamps burn out. I replaced it with the same type halogen bulb that came in it. It is much easier to deal with if you pop the whole light fixture out of the hood and unplug it. This way it is much easier to remove the lens and replace the bulb.
Brian
__________________
SuEllyn & Brian McCabe
WBCCI #3628 -- AIR #14872 -- TAC #FL-7
2015 FC 25' FB (Lucy) with ProPride
2020 Silverado 2500 (Vivian)
2023 Rivian R1T (Opal)
|
|
|
05-28-2015, 06:39 PM
|
#11
|
Rivet Master
2012 27' Flying Cloud
W
, New England
Join Date: Oct 2012
Posts: 7,402
|
Quote:
Originally Posted by moosetags
I have already had one of Lucy's range hood lamps burn out. I replaced it with the same type halogen bulb that came in it. It is much easier to deal with if you pop the whole light fixture out of the hood and unplug it. This way it is much easier to remove the lens and replace the bulb.
Brian
|
Can you describe how you did that?
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|